Flat RoofingContractors

Flat roof systems

EPDM rubber roofing in Cirencester

Rubber roofing for Cirencester homes, landlords and small businesses: we strip, insulate where needed and re-cover flat roofs in EPDM, then finish the edges, outlets and wall upstands carefully. You deal with one contractor from survey to sign-off, and you get a written workmanship guarantee on every re-roof.

Roofer unrolling a single sheet of black EPDM membrane over a new OSB deck on a garage roofComputer-generated example image

Cirencester at a glance

Postcode districts
GL7
Population
about 20,229 (GeoNames)
Council area
Cotswold District Council
Building approval
Cotswold District Council building control, or a registered building control approver
Nearest main town
Cheltenham, about 13 miles
Guide price region
South West (+3% on West Midlands rates)

Why choose EPDM rubber roofing in Cirencester?

For landlords with property in Cirencester, EPDM's low upkeep is the main draw: once the outlets are kept clear and the trims are checked once or twice a year, there is little else to do. It also goes down quickly on a small roof, which keeps disruption for tenants to a minimum.

In and around Cirencester, flat roofs are typically found on lock-up garage blocks on estates, and on newer estates where the first extension roofs are now being replaced. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.

How much does an EPDM rubber roof cost in Cirencester?

For Cirencester we use South West rates: £1,650–£2,900 is the guide for a typical 18 m² garage roof in EPDM, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), EPDM rubber£1,650–£2,900
Extension (20 m²), EPDM, new deck + insulation£2,900–£5,050
Porch or bay (4 m²), EPDM£750–£1,300

How long does an EPDM roof last, and what guarantees come with it?

A well-specified EPDM roof typically lasts 25 to 50 years, and one BBA assessment of an EPDM membrane puts its expected life at 35 years or more. Problems usually come from poorly bonded upstands, damaged trims or ponding, rather than the rubber itself.

Three separate documents can sit behind an EPDM roof:

  • Manufacturer material guarantee: covers the membrane and, on some systems, the wider build-up. Many need registration and a specified build-up, so we register it for you where the system allows.
  • Our written workmanship guarantee: given on every re-roof, with the length set out in your quote.
  • Insurance-backed guarantee: an option worth asking about if you want cover that does not depend on the contractor still trading.

A BBA certificate is an assessment of the product, not a guarantee. Our guide to flat roof guarantees explains the differences, and the lifespan guide compares EPDM with the other systems.

What's included?

  • Warm-roof insulation and vapour control layer where required
  • Deck check and replacement of soft or rotten boards
  • New drip and kerb trims, outlets and upstand details
  • EPDM membrane fully bonded, in one sheet where the roof size allows

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

EPDM rubber roofing in Cirencester: questions

Do you cover Cirencester?

Yes. Cirencester is part of our Gloucestershire coverage, including postcode districts GL7. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Cirencester?

Where the work needs approval it goes to Cotswold District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does an EPDM rubber roof cost in Cirencester?

£1,650–£2,900 for a typical 18 m² garage roof in EPDM, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Does an EPDM roof need maintenance?

Very little. Clear leaves from outlets and gutters, look over trims and upstands once or twice a year and after storms, and keep foot traffic to a minimum.

How long does it take to fit an EPDM roof?

A single garage typically takes one to two days and an insulated extension roof two to three, weather permitting. Larger roofs, scaffold and complex details add time.

Other flat roof work in Cirencester

EPDM rubber roofing in Cirencester: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price