Flat RoofingContractors

Repairs and surveys

Flat roof repairs in Milford Haven

For homeowners and landlords in Milford Haven, a flat roof repair should be simple to arrange and clear about what it covers. We inspect, trace the leak, explain the options in plain terms and confirm a fixed price. The work itself is carried out by vetted roofing teams working under S&K.

Roofer cutting out a blister on an old mineral felt flat roof before a patch repairComputer-generated example image

Milford Haven at a glance

Postcode districts
SA73
Population
about 13,582 (GeoNames)
Council area
Pembrokeshire County Council
Building approval
Pembrokeshire County Council building control, or a registered building control approver
Nearest main town
Haverfordwest, about 7 miles
Guide price region
Wales (−8% on West Midlands rates)

When is a repair the right answer in Milford Haven?

Landlords and managing agents in Milford Haven need a repair done properly once, rather than a quick fix that brings tenants back on the phone a month later. We trace the leak to its source and confirm the price in writing, so the repair can be approved and booked without guesswork.

Around Milford Haven, flat roofs are common on 1930s semis with flat-roofed garages and kitchen extensions and on shops with flat-roofed rear stores below flats. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.

How much does a flat roof repair cost in Milford Haven?

At Wales guide rates, a localised patch repair comes to £140–£460 including VAT. We confirm the price once we've traced the leak or seen the damage.

JobGuide price inc VAT
Localised patch repair£140–£460
Upstand or flashing repair£230–£600
Outlet or drainage repair£110–£320
Emergency temporary weatherproofing visit£170–£410
Condition survey and leak investigation£140–£280

Which repair materials work with my type of flat roof?

The repair has to use the same system as the roof, because many flat roof materials don't bond to each other and some damage each other.

  • Torch-on felt: repaired with compatible bitumen membrane, cut back to sound felt and lapped well beyond the defect. Torching near timber, insulation or fascias needs care, and some details are better done with cold-applied methods.
  • EPDM rubber: repaired with EPDM patches and the manufacturer's primer and seam tape. Bitumen products and many general-purpose sealants won't bond to EPDM and shouldn't be used on it.
  • GRP fibreglass: the area is ground back, then new resin and glass matting are laid and finished with topcoat to match.
  • Liquid-applied and single-ply: repaired with the same manufacturer's products wherever possible, as mixing systems can affect a material guarantee.
  • Mastic asphalt: cracks and blisters are cut out and made good with new asphalt by an operative who works with it.

A tin of roof sealant or bitumen paint may stop a drip for a while, but on the wrong membrane it makes a proper repair harder later.

What's included?

  • Inspection of the whole roof, not just the wet patch
  • Leak path traced from the stain back to the entry point
  • Upstands, flashings, laps and seams made good
  • Repairs with materials compatible with your roof system

Building regulations in Wales

The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.

Which nearby areas do we also cover?

Flat roof repairs in Milford Haven: questions

Do you cover Milford Haven?

Yes. Milford Haven is part of our Pembrokeshire coverage, including postcode districts SA73. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Milford Haven?

Where the work needs approval it goes to Pembrokeshire County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a flat roof repair cost in Milford Haven?

£140–£460 for a localised patch repair, at Wales guide rates including VAT. We confirm the price once we've traced the leak or seen the damage.

Will a repair affect my roof's guarantee?

It can. If the roof is still under a manufacturer's material guarantee, the repair should normally use that manufacturer's products and methods, so share any guarantee paperwork with us before work starts.

Can a GRP roof be repaired?

Yes. The damaged area is ground back, new resin and matting are laid over it and a matching topcoat goes on top. Cracks that keep reappearing along the same line often point to movement in the deck, which needs fixing first.

Other flat roof work in Milford Haven

Flat roof repairs in Milford Haven: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price