Selby at a glance
- Postcode districts
- YO8
- Population
- about 24,859 (GeoNames)
- Council area
- North Yorkshire Council
- Building approval
- North Yorkshire Council building control, or a registered building control approver
- Nearest main town
- York, about 12 miles
- Guide price region
- Yorkshire and the Humber (−5% on West Midlands rates)
What do block and HMO roofs in Selby need?
Service charge budgets for blocks in Selby do not always stretch to a whole roof at once. We can phase a re-roof over more than one budget year, pricing each phase separately in writing and keeping every section watertight in between, so the building stays protected while the cost is spread.
In and around Selby, flat roofs are typically found on 1930s semis with flat-roofed garages and kitchen extensions, and on low-rise post-war blocks of flats. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.
How much does a block or HMO roof cost in Selby?
For Selby we use Yorkshire and the Humber rates: £14,750–£25,850 is the guide for a 150 m² block-of-flats roof in felt with insulation and scaffold, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Block of flats (150 m²), felt + insulation + scaffold | £14,750–£25,850 |
| Commercial roof (100 m²), single-ply + insulation | £12,550–£20,700 |
How do you manage access and residents during the work?
We agree an access and communication plan with the agent or freeholder before the scaffold goes up, so residents know what is happening and when.
That usually covers notices in the common parts and letters to each flat, scaffold and skip positions, keeping entrances, escape routes and bin stores clear, working hours, securing the scaffold out of hours, and a named contact for questions. If we need to look at a ceiling inside a top-floor flat, we arrange access through the agent or landlord.
Occupied blocks are re-roofed in phases, with each section watertight before the team leaves site, which also lets a larger roof be spread over more than one service charge year. Hot works near windows, vents and escape routes are tightly controlled, or avoided altogether with cold-applied systems.
What's included?
- Resident notices, access planning and phased work
- Building control and insulation upgrades handled where needed
- Written workmanship guarantee, with manufacturer guarantees registered where the system allows
- Long-life systems: mastic asphalt, EPDM, single-ply and built-up felt
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Flats, HMOs and block roofs in Selby: questions
Do you cover Selby?
Yes. Selby is part of our North Yorkshire coverage, including postcode districts YO8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Selby?
Where the work needs approval it goes to North Yorkshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a block or HMO roof cost in Selby?
£14,750–£25,850 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can you quote for more than one roofing system?
Yes. We can price two or more systems on the same scope, for example built-up felt and single-ply, so leaseholders and the freeholder can compare cost against expected service life.
Does a block roof replacement need building control?
Usually, yes. Re-covering more than half of a roof over heated flats normally triggers the thermal element rules, which bring insulation and approval requirements, and we handle building control or building standards where it is needed.