Flat RoofingContractors

Commercial and blocks

Flats, HMOs and block roofs across Oxfordshire

Across Oxfordshire, our vetted roofing teams working under S&K re-roof shared flat roofs on purpose-built blocks, stair cores, lift rooms, garages and bin stores. We plan scaffold, access and resident notices with the agent or freeholder, check fire performance near boundaries, and handle building control where the roof needs an insulation upgrade.

1960s block of flats with scaffold and edge protection while its flat roof is replacedComputer-generated example image
Guide price
£17,100–£29,900
Survey
Free for new and replacement roofs
Quote
Fixed, in writing
Coverage
England, Wales, Scotland, NI

Oxfordshire at a glance

Largest towns
Oxford, Banbury, Abingdon, Bicester
Postcode areas
OX
Building control
Oxford City Council, Cherwell District Council, Vale of White Horse District Council and 2 other councils
Neighbouring areas
Buckinghamshire · Berkshire · Bedfordshire · Warwickshire
Guide price region
South East (+10% on West Midlands rates)

How much does a block or HMO roof cost in Oxfordshire?

Guide prices including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Block of flats (150 m²), felt + insulation + scaffold£17,100–£29,900
Commercial roof (100 m²), single-ply + insulation£14,550–£23,950

Which flat roofs are common in Oxfordshire?

Flat roofs in Oxfordshire sit on newer estates where the first extension roofs are now being replaced, 1960s and 1970s link-detached houses with flat-roofed garages and porches and lock-up garage blocks on estates. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Oxfordshire the application goes to Oxford City Council, Cherwell District Council, Vale of White Horse District Council and 2 other councils. More on the rules.

Which roofing systems last longest on a block of flats?

Mastic asphalt, EPDM, single-ply and high-performance built-up felt all give long service lives on block roofs; the right choice depends on the deck, how the roof is used, the details and the whole-life cost.

  • Mastic asphalt: 30–60 years with maintenance, common on concrete-decked blocks and walkways. See mastic asphalt roofing.
  • EPDM: 25–50 years, laid in large sheets with few joins.
  • Single-ply: 25–35+ years, quick to lay on larger roofs, with welded laps. See single-ply roofing.
  • Built-up felt: 15–25 years for modern torch-on systems and longer for high-performance systems, robust where maintenance teams walk the roof.
  • Liquid-applied: 10–25+ years by product, useful as an overlay on a sound roof with complex details.

The cheapest roof today is not always the cheapest over the life of the building. A longer-life system, with tapered insulation to cure ponding, can mean fewer reactive repairs and fewer rounds of consultation. These lives are indicative and assume good specification and regular maintenance.

Do fire and insulation rules affect block roofs?

Yes. Where a roof is close to a boundary, building regulations limit which coverings can be used, and the build-up should carry a suitable external fire classification such as BROOF(t4); in England this is covered by Approved Document B.

BROOF(t4) applies to a tested build-up, so we check that the manufacturer's classification covers the deck, insulation and membrane actually being installed, not just the membrane name. Where the roof crosses a separating or compartment wall, the fire-stopping detail is kept intact.

Re-covering more than half of a roof over heated flats usually triggers the thermal element rules, so the insulation is upgraded towards the renovation U-value where feasible: 0.16 W/m²K for dwellings in England and Wales. We handle building control where it is needed. See building regulations and warm vs cold roofs.

Which towns in Oxfordshire do we cover?

Flats, HMOs and block roofs in Oxfordshire: questions

Which towns in Oxfordshire do you cover?

All of Oxfordshire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a block or HMO roof cost in Oxfordshire?

£17,100–£29,900 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which postcode areas do you cover in Oxfordshire?

All of Oxfordshire, including the OX postcode areas. Send your full postcode and we'll confirm.

Do you work for HMO landlords?

Yes. We replace and repair flat roofs on HMOs and converted flats, arrange access with tenants through the landlord or agent, and keep escape routes and entrances clear while we work.

Do residents need to move out during a re-roof?

No. Block roofs are normally replaced with residents in place, and if we need to check a ceiling inside a top-floor flat, access is arranged through the agent or landlord.

Does a block roof replacement need building control?

Usually, yes. Re-covering more than half of a roof over heated flats normally triggers the thermal element rules, which bring insulation and approval requirements, and we handle building control or building standards where it is needed.

Everything about flats, HMOs and block roofs → · All flat roofing in Oxfordshire →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price