Flat RoofingContractors

Commercial and blocks

Flats, HMOs and block roofs across Wiltshire

If you manage residential property in Wiltshire, we can give you what you need to plan roof spending: a paid condition report where you need one, a free survey and fixed quote for replacement, and phased options priced separately. Where leaseholder consultation is needed, the freeholder or agent runs it, and our quotes are laid out to support it.

1960s block of flats with scaffold and edge protection while its flat roof is replacedComputer-generated example image
Guide price
£16,000–£28,000
Survey
Free for new and replacement roofs
Quote
Fixed, in writing
Coverage
England, Wales, Scotland, NI

Wiltshire at a glance

Largest towns
Swindon, Salisbury, Trowbridge, Chippenham
Postcode areas
BA, SN, SP
Building control
Swindon Borough Council and Wiltshire Council
Neighbouring areas
Bristol · Gloucestershire · Somerset · Dorset
Guide price region
South West (+3% on West Midlands rates)

How much does a block or HMO roof cost in Wiltshire?

Guide prices including VAT at South West rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Block of flats (150 m²), felt + insulation + scaffold£16,000–£28,000
Commercial roof (100 m²), single-ply + insulation£13,650–£22,450

Which flat roofs are common in Wiltshire?

Flat roofs in Wiltshire sit on low-rise post-war blocks of flats, 1930s semis with flat-roofed garages and kitchen extensions and 1960s and 1970s link-detached houses with flat-roofed garages and porches. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Wiltshire the application goes to Swindon Borough Council and Wiltshire Council. More on the rules.

Which roofing systems last longest on a block of flats?

Mastic asphalt, EPDM, single-ply and high-performance built-up felt all give long service lives on block roofs; the right choice depends on the deck, how the roof is used, the details and the whole-life cost.

  • Mastic asphalt: 30–60 years with maintenance, common on concrete-decked blocks and walkways. See mastic asphalt roofing.
  • EPDM: 25–50 years, laid in large sheets with few joins.
  • Single-ply: 25–35+ years, quick to lay on larger roofs, with welded laps. See single-ply roofing.
  • Built-up felt: 15–25 years for modern torch-on systems and longer for high-performance systems, robust where maintenance teams walk the roof.
  • Liquid-applied: 10–25+ years by product, useful as an overlay on a sound roof with complex details.

The cheapest roof today is not always the cheapest over the life of the building. A longer-life system, with tapered insulation to cure ponding, can mean fewer reactive repairs and fewer rounds of consultation. These lives are indicative and assume good specification and regular maintenance.

How do you manage access and residents during the work?

We agree an access and communication plan with the agent or freeholder before the scaffold goes up, so residents know what is happening and when.

That usually covers notices in the common parts and letters to each flat, scaffold and skip positions, keeping entrances, escape routes and bin stores clear, working hours, securing the scaffold out of hours, and a named contact for questions. If we need to look at a ceiling inside a top-floor flat, we arrange access through the agent or landlord.

Occupied blocks are re-roofed in phases, with each section watertight before the team leaves site, which also lets a larger roof be spread over more than one service charge year. Hot works near windows, vents and escape routes are tightly controlled, or avoided altogether with cold-applied systems.

Which towns in Wiltshire do we cover?

Flats, HMOs and block roofs in Wiltshire: questions

Which towns in Wiltshire do you cover?

All of Wiltshire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a block or HMO roof cost in Wiltshire?

£16,000–£28,000 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which council handles building control for a flat roof in Wiltshire?

It depends on where the roof is: in Wiltshire that's Swindon Borough Council and Wiltshire Council. Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. We confirm which applies at the survey.

Do residents need to move out during a re-roof?

No. Block roofs are normally replaced with residents in place, and if we need to check a ceiling inside a top-floor flat, access is arranged through the agent or landlord.

What if a top-floor flat is leaking before the roof is replaced?

We can attend for emergency temporary weatherproofing as soon as a team is available, guide £190–£460. That protects the flat while the permanent work is agreed.

Can a block roof be replaced in phases?

Yes. Larger roofs can be split into sections over one or more budget years, with each phase priced separately and each section left watertight before the team leaves site.

Everything about flats, HMOs and block roofs → · All flat roofing in Wiltshire →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price