Melksham at a glance
- Postcode districts
- SN12
- Population
- about 19,357 (GeoNames)
- Council area
- Wiltshire Council
- Building approval
- Wiltshire Council building control, or a registered building control approver
- Nearest main town
- Bath, about 10 miles
- Guide price region
- South West (+3% on West Midlands rates)
What do block and HMO roofs in Melksham need?
Service charge budgets for blocks in Melksham do not always stretch to a whole roof at once. We can phase a re-roof over more than one budget year, pricing each phase separately in writing and keeping every section watertight in between, so the building stays protected while the cost is spread.
In a town like Melksham, flat roofs are commonly found on newer estates where the first extension roofs are now being replaced or lock-up garage blocks on estates. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.
How much does a block or HMO roof cost in Melksham?
Guide price in Melksham: £16,000–£28,000 for a 150 m² block-of-flats roof in felt with insulation and scaffold, including VAT at South West rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Block of flats (150 m²), felt + insulation + scaffold | £16,000–£28,000 |
| Commercial roof (100 m²), single-ply + insulation | £13,650–£22,450 |
How does Section 20 consultation affect roof works?
In England and Wales, if leaseholders pay for roof works through the service charge and any one leaseholder's share will be over the statutory threshold, the freeholder or managing agent must consult them under Section 20 of the Landlord and Tenant Act 1985 before the work is contracted.
The consultation is run by the freeholder or agent, not by us. It usually involves a notice of intention and then estimates shared with leaseholders, each stage with time for comments, and missing a step can limit what can be recovered through the service charge. Take advice from your agent or a specialist adviser if you are unsure; we don't give legal advice.
What we provide is an itemised written quote that is easy to share and compare: system and build-up, roof area, scaffold and access, insulation, outlets, upstands and trims, waste disposal, provisional sums for hidden defects such as deck repairs, and VAT shown clearly. We can price more than one system on the same scope, so leaseholders are comparing like with like.
What's included?
- Building control and insulation upgrades handled where needed
- Resident notices, access planning and phased work
- Long-life systems: mastic asphalt, EPDM, single-ply and built-up felt
- Quotes laid out to support leaseholder consultation
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Flats, HMOs and block roofs in Melksham: questions
Do you cover Melksham?
Yes. Melksham is part of our Wiltshire coverage, including postcode districts SN12. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Melksham?
Where the work needs approval it goes to Wiltshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a block or HMO roof cost in Melksham?
£16,000–£28,000 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can you quote for more than one roofing system?
Yes. We can price two or more systems on the same scope, for example built-up felt and single-ply, so leaseholders and the freeholder can compare cost against expected service life.
Does a block roof replacement need building control?
Usually, yes. Re-covering more than half of a roof over heated flats normally triggers the thermal element rules, which bring insulation and approval requirements, and we handle building control or building standards where it is needed.