Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Long Eaton

If you own a home or building in Long Eaton and want a flat roof you can step onto for maintenance, GRP is worth considering. Our teams fit it across Derbyshire, starting with a free survey and a fixed quote. Guide prices are available online, and the final figure is confirmed in writing before any work is booked.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Long Eaton at a glance

Postcode districts
NG10
Population
about 47,898 (GeoNames)
Council area
Erewash Borough Council
Building approval
Erewash Borough Council building control, or a registered building control approver
Nearest main town
Nottingham, about 6 miles
Guide price region
East Midlands (−2% on West Midlands rates)

Why choose GRP fibreglass roofing in Long Eaton?

Landlords and small businesses in Long Eaton often favour GRP on roofs that contractors need to access for plant, aerials or gutter clearance. The surface resists scuffs better than a soft membrane, and small damage can usually be ground back and re-laminated without disturbing the rest of the roof.

In and around Long Eaton, flat roofs are typically found on bungalows with flat-roofed side extensions and dormers, and on 1930s semis with flat-roofed garages and kitchen extensions. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.

How much does a GRP fibreglass roof cost in Long Eaton?

For Long Eaton we use East Midlands rates: £2,950–£5,300 is the guide for a 20 m² extension roof in GRP with a new deck and insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£2,950–£5,300
Dormer (8 m²), GRP, scaffold£1,350–£2,600
Single garage (18 m²), GRP fibreglass£1,750–£3,200
Single garage (18 m²), EPDM rubber£1,550–£2,750
Extension (20 m²), EPDM, new deck + insulation£2,750–£4,800

Is GRP better than EPDM, felt or a liquid roof?

GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.

Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.

Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.

For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.

What's included?

  • Coloured UV-stable topcoat, with anti-slip finish on request
  • Removal of the old covering and disposal of waste
  • New OSB3 or plywood deck, fixed at close centres
  • Moulded GRP trims, kerbs and upstands

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Long Eaton: questions

Do you cover Long Eaton?

Yes. Long Eaton is part of our Derbyshire coverage, including postcode districts NG10. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Long Eaton?

Where the work needs approval it goes to Erewash Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Long Eaton?

£2,950–£5,300 for a 20 m² extension roof in GRP with a new deck and insulation, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

How long before a new GRP roof is fully cured?

The topcoat is usually touch-dry within hours in reasonable weather, but full cure takes longer in cold conditions. We advise keeping off the roof until the team confirms it is ready.

What colours does a GRP roof come in?

Topcoats are typically available in greys, greens, black and some other shades. Lighter colours absorb less heat, and an anti-slip finish can be added where people will walk on the roof.

Other flat roof work in Long Eaton

GRP fibreglass roofing in Long Eaton: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price