Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Fleet

Thinking about a GRP roof for a dormer or extension in Fleet? The finish is rigid and tidy, with trims moulded into the roof rather than glued on. It does need a dry day and a new deck, so we survey first, explain what is involved and give you a fixed written quote with no obligation.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Fleet at a glance

Postcode districts
GU13, GU51, GU52
Population
about 38,726 (GeoNames)
Council area
Hart District Council
Building approval
Hart District Council building control, or a registered building control approver
Nearest main town
Bracknell, about 10 miles
Guide price region
South East (+10% on West Midlands rates)

Why choose GRP fibreglass roofing in Fleet?

For a garage or extension in Fleet that doubles as a step-out space for window cleaning, GRP gives a firmer footing than a rubber membrane. With an anti-slip topcoat it handles light, occasional use, though a full terrace needs its own specification and, in many cases, planning permission.

In and around Fleet, flat roofs are typically found on bungalows with flat-roofed side extensions and dormers, and on shops with flat-roofed rear stores below flats. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.

How much does a GRP fibreglass roof cost in Fleet?

Guide price in Fleet: £3,300–£5,900 for a 20 m² extension roof in GRP with a new deck and insulation, including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£3,300–£5,900
Dormer (8 m²), GRP, scaffold£1,550–£2,900
Single garage (18 m²), GRP fibreglass£1,950–£3,600
Single garage (18 m²), EPDM rubber£1,750–£3,100
Extension (20 m²), EPDM, new deck + insulation£3,100–£5,350

Why do GRP roofs crack, and can weather affect the installation?

GRP usually cracks where the structure moves and the laminate cannot, typically along board joints, at the junction with trims, or where a roof meets a wall. Weather during laying is the other big factor, because resin cures by chemical reaction and that reaction is sensitive to temperature and moisture.

How we reduce the risk of cracking:

  • boards fixed at close centres so the deck does not flex;
  • joints taped and reinforced with an extra strip of mat;
  • wall junctions finished with a separate trim or flashing, not laminated hard into the masonry;
  • roofs over a certain size divided with movement details where the system calls for them.

And how weather is managed:

  • no laminating in rain, on a damp deck, or when dew or frost is likely before the resin sets;
  • catalyst levels adjusted for the temperature, so resin neither stays tacky on a cold day nor kicks too fast in summer heat;
  • the roof sheeted over if a shower threatens a fresh laminate.

That is why a GRP date can move at short notice. A day's delay costs far less than a laminate that never cures properly.

What's included?

  • Moulded GRP trims, kerbs and upstands
  • Resin and glass-mat laminate with taped and reinforced joints
  • Warm-roof insulation and vapour control layer where the room below is heated
  • Removal of the old covering and disposal of waste

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Fleet: questions

Do you cover Fleet?

Yes. Fleet is part of our Hampshire coverage, including postcode districts GU13, GU51, GU52. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Fleet?

Where the work needs approval it goes to Hart District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Fleet?

£3,300–£5,900 for a 20 m² extension roof in GRP with a new deck and insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can you walk on a GRP roof?

Yes, a correctly laid GRP roof takes occasional foot traffic, such as cleaning windows or maintaining plant. For a regular walkway or terrace, an anti-slip topcoat and a suitable specification are needed.

How long before a new GRP roof is fully cured?

The topcoat is usually touch-dry within hours in reasonable weather, but full cure takes longer in cold conditions. We advise keeping off the roof until the team confirms it is ready.

Other flat roof work in Fleet

GRP fibreglass roofing in Fleet: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price