Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Royston

Fibreglass roofing in Royston: a new timber deck, moulded trims, a resin and glass-mat laminate and a coloured topcoat, built up on the roof to form one hard skin. We strip the old covering, add insulation where the room below is heated, and plan laminating around the weather so the resin cures properly.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Royston at a glance

Postcode districts
SG8
Population
about 15,781 (GeoNames)
Council area
North Hertfordshire District Council
Building approval
North Hertfordshire District Council building control, or a registered building control approver
Nearest main town
Cambridge, about 12 miles
Guide price region
East of England (+5% on West Midlands rates)

Why choose GRP fibreglass roofing in Royston?

If a flat roof in Royston has already been patched with fibreglass that keeps cracking, a full GRP replacement on a new, properly fixed deck often solves the problem. Cracks usually come from movement in the boards beneath, so renewing the deck and reinforcing the joints deals with the cause.

In a town like Royston, flat roofs are commonly found on lock-up garage blocks on estates or newer estates where the first extension roofs are now being replaced. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof.

How much does a GRP fibreglass roof cost in Royston?

At East of England guide rates, a 20 m² extension roof in GRP with a new deck and insulation comes to £3,150–£5,650 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£3,150–£5,650
Dormer (8 m²), GRP, scaffold£1,450–£2,800
Single garage (18 m²), GRP fibreglass£1,850–£3,400
Single garage (18 m²), EPDM rubber£1,700–£2,950
Extension (20 m²), EPDM, new deck + insulation£2,950–£5,150

Why do GRP roofs crack, and can weather affect the installation?

GRP usually cracks where the structure moves and the laminate cannot, typically along board joints, at the junction with trims, or where a roof meets a wall. Weather during laying is the other big factor, because resin cures by chemical reaction and that reaction is sensitive to temperature and moisture.

How we reduce the risk of cracking:

  • boards fixed at close centres so the deck does not flex;
  • joints taped and reinforced with an extra strip of mat;
  • wall junctions finished with a separate trim or flashing, not laminated hard into the masonry;
  • roofs over a certain size divided with movement details where the system calls for them.

And how weather is managed:

  • no laminating in rain, on a damp deck, or when dew or frost is likely before the resin sets;
  • catalyst levels adjusted for the temperature, so resin neither stays tacky on a cold day nor kicks too fast in summer heat;
  • the roof sheeted over if a shower threatens a fresh laminate.

That is why a GRP date can move at short notice. A day's delay costs far less than a laminate that never cures properly.

What's included?

  • Warm-roof insulation and vapour control layer where the room below is heated
  • Moulded GRP trims, kerbs and upstands
  • Resin and glass-mat laminate with taped and reinforced joints
  • Removal of the old covering and disposal of waste

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Royston: questions

Do you cover Royston?

Yes. Royston is part of our Hertfordshire coverage, including postcode districts SG8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Royston?

Where the work needs approval it goes to North Hertfordshire District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Royston?

£3,150–£5,650 for a 20 m² extension roof in GRP with a new deck and insulation, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Does GRP smell when it is being laid?

Yes, the resin gives off a strong styrene smell while it cures. It usually fades within a day or so, and we advise keeping nearby windows closed while the team works.

Is GRP suitable for a dormer roof?

Yes, GRP is commonly used on dormers because the trims can be moulded neatly and the finish looks tidy from the ground. Scaffold is normally needed, which we include in the quote.

Other flat roof work in Royston

GRP fibreglass roofing in Royston: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price