Flint at a glance
- Postcode districts
- CH6
- Population
- about 26,442 (GeoNames)
- Council area
- Flintshire County Council
- Building approval
- Flintshire County Council building control, or a registered building control approver
- Nearest main town
- Buckley, about 6 miles
- Guide price region
- Wales (−8% on West Midlands rates)
Why choose a liquid-applied roof in Flint?
Choose liquid roofing in Flint when the shape of the roof makes sheet materials awkward: curved edges, small dormers with many corners, or a mix of levels joined by short upstands. Each detail is reinforced in the same material as the main area, so the whole roof is continuous.
In a town like Flint, flat roofs are commonly found on lock-up garage blocks on estates or newer estates where the first extension roofs are now being replaced. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a liquid-applied roof cost in Flint?
For Flint we use Wales rates: £1,900–£3,000 is the guide for a typical 18 m² garage roof in a liquid-applied system, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), liquid-applied | £1,900–£3,000 |
| Balcony (12 m²), liquid-applied, scaffold | £1,750–£3,000 |
| Single garage (18 m²), EPDM rubber | £1,450–£2,600 |
| Extension (20 m²), EPDM, new deck + insulation | £2,600–£4,500 |
Can a liquid roof go over my existing roof, and what preparation is needed?
Yes, if the existing roof is dry, firmly bonded and sitting on a sound deck. A liquid membrane is only as good as what lies beneath it, so we test the old roof before agreeing to overlay it.
At survey we check for:
- Trapped moisture: soft spots, blisters or wet insulation mean the roof should be stripped, because water sealed in will cause new blisters and decay.
- Deck condition: any sponginess or deflection needs repair first.
- Adhesion: on felt and asphalt, loose areas are cut out and patched, and the existing surface must take the primer properly.
- Falls and ponding: a coating follows the roof as it is. If water ponds now, it will pond on the new surface too unless the falls are corrected.
Preparation then follows: loose chippings removed, the surface cleaned and left to dry, blisters cut back and repaired, cracks filled, and the right primer applied. On older felt, mineral surfaces may need extra cleaning to give a good bond. Where the tests fail, we say so plainly and quote for a strip and re-roof. Read more on ponding water.
What's included?
- Fleece-reinforced liquid membrane applied to the specified thickness
- Surface cleaning, repairs and removal of loose material
- Survey of the existing roof, including moisture and adhesion checks
- Top coat with optional anti-slip finish, and guarantee registration where available
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
Liquid-applied roofing in Flint: questions
Do you cover Flint?
Yes. Flint is part of our Flintshire coverage, including postcode districts CH6. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Flint?
Where the work needs approval it goes to Flintshire County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a liquid-applied roof cost in Flint?
£1,900–£3,000 for a typical 18 m² garage roof in a liquid-applied system, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
How long does a liquid roof take to cure?
That depends on the product and the weather. Some systems are rain-resistant within an hour or so, others take longer, and full cure can take a day or more in cool weather.
Is liquid roofing the same as a roof paint?
No. A proper liquid-applied membrane is built to a specified thickness and usually reinforced with fleece, while roof paints and simple coatings are much thinner and mainly used to extend the life of an existing covering.