Flat RoofingContractors

Flat roof systems

Liquid-applied roofing in Hillingdon

Our liquid roofing service in Hillingdon and across London covers overlays of sound roofs, full re-roofs with a new deck and insulation, and repairs to failing details. Every job starts with careful preparation, because a liquid membrane only performs when it is bonded to a clean, dry and stable surface.

Grey liquid waterproofing and reinforcement fleece rolled around a vent pipe on a flat roofComputer-generated example image

Hillingdon at a glance

Postcode districts
UB8, UB10, UB11, UB7, UB4, HA4
Council area
London Borough of Hillingdon
Building approval
London Borough of Hillingdon building control, or a registered building control approver
Guide price region
London (+20% on West Midlands rates)

Why choose a liquid-applied roof in Hillingdon?

Choose liquid roofing in Hillingdon when the shape of the roof makes sheet materials awkward: curved edges, small dormers with many corners, or a mix of levels joined by short upstands. Each detail is reinforced in the same material as the main area, so the whole roof is continuous.

Around Hillingdon, flat roofs are common on mansard and dormer loft conversions and on Victorian and Edwardian terraces with flat-roofed back additions. The Thames basin is one of the drier parts of Britain at roughly 730 mm of rain a year, but summer heat is the bigger test here: dark membranes on south-facing roofs swing a long way in temperature.

How much does a liquid-applied roof cost in Hillingdon?

Guide price in Hillingdon: £2,450–£3,900 for a typical 18 m² garage roof in a liquid-applied system, including VAT at London rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), liquid-applied£2,450–£3,900
Balcony (12 m²), liquid-applied, scaffold£2,300–£3,900
Single garage (18 m²), EPDM rubber£1,900–£3,350
Extension (20 m²), EPDM, new deck + insulation£3,350–£5,850

Can a liquid roof go over my existing roof, and what preparation is needed?

Yes, if the existing roof is dry, firmly bonded and sitting on a sound deck. A liquid membrane is only as good as what lies beneath it, so we test the old roof before agreeing to overlay it.

At survey we check for:

  • Trapped moisture: soft spots, blisters or wet insulation mean the roof should be stripped, because water sealed in will cause new blisters and decay.
  • Deck condition: any sponginess or deflection needs repair first.
  • Adhesion: on felt and asphalt, loose areas are cut out and patched, and the existing surface must take the primer properly.
  • Falls and ponding: a coating follows the roof as it is. If water ponds now, it will pond on the new surface too unless the falls are corrected.

Preparation then follows: loose chippings removed, the surface cleaned and left to dry, blisters cut back and repaired, cracks filled, and the right primer applied. On older felt, mineral surfaces may need extra cleaning to give a good bond. Where the tests fail, we say so plainly and quote for a strip and re-roof. Read more on ponding water.

What's included?

  • Top coat with optional anti-slip finish, and guarantee registration where available
  • Fleece-reinforced liquid membrane applied to the specified thickness
  • Survey of the existing roof, including moisture and adhesion checks
  • Surface cleaning, repairs and removal of loose material

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Liquid-applied roofing in Hillingdon: questions

Do you cover Hillingdon?

Yes. Hillingdon is part of our London coverage, including postcode districts UB8, UB10, UB11, UB7, UB4, HA4. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Hillingdon?

Where the work needs approval it goes to London Borough of Hillingdon building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a liquid-applied roof cost in Hillingdon?

£2,450–£3,900 for a typical 18 m² garage roof in a liquid-applied system, at London guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is liquid roofing good for balconies?

Often, yes. It forms neatly around railings, door thresholds and drains, and some systems take foot traffic. A new balcony or roof terrace generally needs planning permission, so check before converting a roof.

Is liquid roofing the same as a roof paint?

No. A proper liquid-applied membrane is built to a specified thickness and usually reinforced with fleece, while roof paints and simple coatings are much thinner and mainly used to extend the life of an existing covering.

Other flat roof work in Hillingdon

Liquid-applied roofing in Hillingdon: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price