Richmond upon Thames at a glance
- Postcode districts
- TW1, TW2, TW10, TW11, TW9, TW12
- Council area
- London Borough of Richmond upon Thames
- Building approval
- London Borough of Richmond upon Thames building control, or a registered building control approver
- Guide price region
- London (+20% on West Midlands rates)
Why choose a liquid-applied roof in Richmond upon Thames?
Where a building in Richmond upon Thames has an older asphalt or concrete roof that is sound but tiring, a compatible liquid system can sometimes refresh it. The key is matching the primer and system to the substrate and dealing with any blisters, cracks or poor falls before the membrane goes on.
Richmond upon Thames's flat roofs are mostly on mansard and dormer loft conversions, with plenty on Victorian and Edwardian terraces with flat-roofed back additions too. The Thames basin is one of the drier parts of Britain at roughly 730 mm of rain a year, but summer heat is the bigger test here: dark membranes on south-facing roofs swing a long way in temperature.
How much does a liquid-applied roof cost in Richmond upon Thames?
Guide price in Richmond upon Thames: £2,450–£3,900 for a typical 18 m² garage roof in a liquid-applied system, including VAT at London rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), liquid-applied | £2,450–£3,900 |
| Balcony (12 m²), liquid-applied, scaffold | £2,300–£3,900 |
| Single garage (18 m²), EPDM rubber | £1,900–£3,350 |
| Extension (20 m²), EPDM, new deck + insulation | £3,350–£5,850 |
When is a liquid roof the best option, and when is it not?
A liquid roof is often the best option for roofs crowded with pipes, vents and upstands, for balconies and walkways, and for overlaying a structurally sound roof that is starting to fail. It is the wrong choice when the deck is rotten, the insulation is wet or the falls are badly wrong.
Advantages: continuous finish with no laps; forms details around pipes and odd shapes easily; cold-applied with no flame; can often go over felt, asphalt or concrete; some systems take foot traffic.
Disadvantages: higher cost per square metre than felt or EPDM; needs dry weather and careful thickness control; only as good as the surface it is bonded to; product quality varies widely across the market.
For a straightforward re-roof on a fresh deck, EPDM or GRP may offer better value. Larger flat areas suit torch-on felt or single-ply. On a sound mastic asphalt roof, a compatible liquid system can sometimes be applied over it. See also our guide to overlay or strip.
What's included?
- Survey of the existing roof, including moisture and adhesion checks
- Detailing of upstands, outlets, pipes and corners before the main area
- Fleece-reinforced liquid membrane applied to the specified thickness
- Surface cleaning, repairs and removal of loose material
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Kingston upon Thames · 3 mi
- Hounslow · 3 mi
- Ealing · 5 mi
- Wandsworth · 5 mi
- Hammersmith and Fulham · 5 mi
- Merton · 6 mi
Liquid-applied roofing in Richmond upon Thames: questions
Do you cover Richmond upon Thames?
Yes. Richmond upon Thames is part of our London coverage, including postcode districts TW1, TW2, TW10, TW11, TW9, TW12. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Richmond upon Thames?
Where the work needs approval it goes to London Borough of Richmond upon Thames building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a liquid-applied roof cost in Richmond upon Thames?
£2,450–£3,900 for a typical 18 m² garage roof in a liquid-applied system, at London guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Is liquid roofing good for balconies?
Often, yes. It forms neatly around railings, door thresholds and drains, and some systems take foot traffic. A new balcony or roof terrace generally needs planning permission, so check before converting a roof.
Can liquid roofing be applied in the rain?
No. The surface must be dry, and most systems need a dry window while they cure. Some fast-curing products shorten that window, but the team will not apply onto a damp roof.