Milford Haven at a glance
- Postcode districts
- SA73
- Population
- about 13,582 (GeoNames)
- Council area
- Pembrokeshire County Council
- Building approval
- Pembrokeshire County Council building control, or a registered building control approver
- Nearest main town
- Haverfordwest, about 7 miles
- Guide price region
- Wales (−8% on West Midlands rates)
Why choose a liquid-applied roof in Milford Haven?
For businesses and landlords in Milford Haven, a cold-applied liquid roof means no flame on site and, with some systems, a short cure time. That can make it easier to work around occupied buildings, tenants and opening hours than a system that needs hot works or a long strip-out.
In and around Milford Haven, flat roofs are typically found on 1930s semis with flat-roofed garages and kitchen extensions, and on low-rise post-war blocks of flats. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a liquid-applied roof cost in Milford Haven?
At Wales guide rates, a typical 18 m² garage roof in a liquid-applied system comes to £1,900–£3,000 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), liquid-applied | £1,900–£3,000 |
| Balcony (12 m²), liquid-applied, scaffold | £1,750–£3,000 |
| Single garage (18 m²), EPDM rubber | £1,450–£2,600 |
| Extension (20 m²), EPDM, new deck + insulation | £2,600–£4,500 |
When is a liquid roof the best option, and when is it not?
A liquid roof is often the best option for roofs crowded with pipes, vents and upstands, for balconies and walkways, and for overlaying a structurally sound roof that is starting to fail. It is the wrong choice when the deck is rotten, the insulation is wet or the falls are badly wrong.
Advantages: continuous finish with no laps; forms details around pipes and odd shapes easily; cold-applied with no flame; can often go over felt, asphalt or concrete; some systems take foot traffic.
Disadvantages: higher cost per square metre than felt or EPDM; needs dry weather and careful thickness control; only as good as the surface it is bonded to; product quality varies widely across the market.
For a straightforward re-roof on a fresh deck, EPDM or GRP may offer better value. Larger flat areas suit torch-on felt or single-ply. On a sound mastic asphalt roof, a compatible liquid system can sometimes be applied over it. See also our guide to overlay or strip.
What's included?
- Surface cleaning, repairs and removal of loose material
- Survey of the existing roof, including moisture and adhesion checks
- Top coat with optional anti-slip finish, and guarantee registration where available
- Detailing of upstands, outlets, pipes and corners before the main area
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
Liquid-applied roofing in Milford Haven: questions
Do you cover Milford Haven?
Yes. Milford Haven is part of our Pembrokeshire coverage, including postcode districts SA73. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Milford Haven?
Where the work needs approval it goes to Pembrokeshire County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a liquid-applied roof cost in Milford Haven?
£1,900–£3,000 for a typical 18 m² garage roof in a liquid-applied system, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can liquid roofing stop a leak on a flat roof?
It can, if the leak is at a detail or the membrane is worn but the roof beneath is sound. If water has soaked the insulation or deck, coating over it will not cure the problem.
How long does a liquid roof take to cure?
That depends on the product and the weather. Some systems are rain-resistant within an hour or so, others take longer, and full cure can take a day or more in cool weather.