Coleraine at a glance
- Postcode districts
- BT51, BT52, BT55, BT56
- Population
- about 25,681 (GeoNames)
- Council area
- Causeway Coast and Glens Borough Council
- Building approval
- Causeway Coast and Glens Borough Council building control
- Guide price region
- Northern Ireland (−12% on West Midlands rates)
Why choose single-ply roofing in Coleraine?
Single-ply also works on an extension or garage in Coleraine if you want a light, clean finish in a pale colour. On small roofs it is usually adhered, and while it can cost more than EPDM, it gives the same welded seams and details found on commercial roofs.
In and around Coleraine, flat roofs are typically found on 1930s semis with flat-roofed garages and kitchen extensions, and on bungalows with flat-roofed side extensions and dormers. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.
How much does a single-ply roof cost in Coleraine?
For Coleraine we use Northern Ireland rates: £11,650–£19,150 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £11,650–£19,150 |
| Single garage (18 m²), single-ply | £1,800–£2,950 |
| Single garage (18 m²), EPDM rubber | £1,400–£2,450 |
| Extension (20 m²), EPDM, new deck + insulation | £2,450–£4,300 |
What insulation and approvals does a single-ply re-roof need?
On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.
Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.
What's included?
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
- Vapour control layer and warm-roof or tapered insulation as specified
- Strip-out or preparation of the existing roof, with waste removed
- Edge protection on every job and walkway protection around plant
Building control in Northern Ireland
In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.
Which nearby areas do we also cover?
Single-ply membrane roofing in Coleraine: questions
Do you cover Coleraine?
Yes. Coleraine is part of our County Londonderry coverage, including postcode districts BT51, BT52, BT55, BT56. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Coleraine?
Where the work needs approval it goes to Causeway Coast and Glens Borough Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Coleraine?
£11,650–£19,150 for a 100 m² commercial roof in single-ply with insulation, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Does single-ply work with solar panels or a green roof?
Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.
Can single-ply roofing be laid over an existing roof?
Sometimes, if the existing roof and deck are dry and sound, often with a separation layer or new insulation on top. Wet insulation or a damaged deck means stripping first.