Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Ballymena

We install single-ply membrane roofs in Ballymena on shops, offices, units, surgeries, clubs and blocks, as well as some domestic garages and extensions. A free survey comes first, then a fixed written quote setting out the membrane, the fixing method and the insulation. The work is carried out by vetted roofing teams working under S&K.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Ballymena at a glance

Postcode districts
BT42, BT43, BT44
Population
about 28,932 (GeoNames)
Council area
Mid and East Antrim Borough Council
Building approval
Mid and East Antrim Borough Council building control
Guide price region
Northern Ireland (−12% on West Midlands rates)

Why choose single-ply roofing in Ballymena?

For a commercial roof in Ballymena with rooflights, plant and outlets, single-ply's welded details give a consistent finish. Pre-formed corners, membrane-coated trims and welded kerbs are all made in the same material as the main roof, which keeps the roof consistent and simplifies any future repairs.

Ballymena's flat roofs are mostly on shops with flat-roofed rear stores below flats, with plenty on low-rise post-war blocks of flats too. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.

How much does a single-ply roof cost in Ballymena?

Guide price in Ballymena: £11,650–£19,150 for a 100 m² commercial roof in single-ply with insulation, including VAT at Northern Ireland rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£11,650–£19,150
Single garage (18 m²), single-ply£1,800–£2,950
Single garage (18 m²), EPDM rubber£1,400–£2,450
Extension (20 m²), EPDM, new deck + insulation£2,450–£4,300

Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?

Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.

MethodHow it worksTypical use
Mechanically fixedFasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheetMetal, timber and concrete decks on commercial roofs
AdheredMembrane bonded to the insulation or deck with adhesiveDomestic roofs, roofs where fixings are unsuitable
BallastedLoose-laid and held down by paving, gravel or a green roofInverted roofs, terraces, green roofs

Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.

Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.

What's included?

  • Hot-air welded seams, each probed along its full length
  • Edge protection on every job and walkway protection around plant
  • Strip-out or preparation of the existing roof, with waste removed
  • Welded details at upstands, outlets, rooflight kerbs and edge trims

Building control in Northern Ireland

In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Ballymena: questions

Do you cover Ballymena?

Yes. Ballymena is part of our County Antrim coverage, including postcode districts BT42, BT43, BT44. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Ballymena?

Where the work needs approval it goes to Mid and East Antrim Borough Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Ballymena?

£11,650–£19,150 for a 100 m² commercial roof in single-ply with insulation, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Does single-ply work with solar panels or a green roof?

Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.

Other flat roof work in Ballymena

Single-ply membrane roofing in Ballymena: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price