Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Exmouth

Our single-ply service in Exmouth covers full replacements, overlays of sound roofs and repairs to welded seams and details. Membranes are chosen to suit the roof: PVC where it fits the specification, TPO or FPO where compatibility with existing materials matters, and adhered or ballasted systems where fixings are unsuitable.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Exmouth at a glance

Postcode districts
EX8
Population
about 36,204 (GeoNames)
Council area
East Devon District Council
Building approval
East Devon District Council building control, or a registered building control approver
Nearest main town
Exeter, about 9 miles
Guide price region
South West (+3% on West Midlands rates)

Why choose single-ply roofing in Exmouth?

For a commercial roof in Exmouth with rooflights, plant and outlets, single-ply's welded details give a consistent finish. Pre-formed corners, membrane-coated trims and welded kerbs are all made in the same material as the main roof, which keeps the roof consistent and simplifies any future repairs.

Exmouth's flat roofs are mostly on low-rise post-war blocks of flats, with plenty on 1960s and 1970s link-detached houses with flat-roofed garages and porches too. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.

How much does a single-ply roof cost in Exmouth?

For Exmouth we use South West rates: £13,650–£22,450 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£13,650–£22,450
Single garage (18 m²), single-ply£2,100–£3,450
Single garage (18 m²), EPDM rubber£1,650–£2,900
Extension (20 m²), EPDM, new deck + insulation£2,900–£5,050

What insulation and approvals does a single-ply re-roof need?

On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.

Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.

What's included?

  • Hot-air welded seams, each probed along its full length
  • Edge protection on every job and walkway protection around plant
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
  • Strip-out or preparation of the existing roof, with waste removed

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Exmouth: questions

Do you cover Exmouth?

Yes. Exmouth is part of our Devon coverage, including postcode districts EX8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Exmouth?

Where the work needs approval it goes to East Devon District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Exmouth?

£13,650–£22,450 for a 100 m² commercial roof in single-ply with insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Does single-ply work with solar panels or a green roof?

Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Other flat roof work in Exmouth

Single-ply membrane roofing in Exmouth: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price