Tiverton at a glance
- Postcode districts
- EX16
- Population
- about 22,291 (GeoNames)
- Council area
- Mid Devon District Council
- Building approval
- Mid Devon District Council building control, or a registered building control approver
- Nearest main town
- Exeter, about 12 miles
- Guide price region
- South West (+3% on West Midlands rates)
Why choose single-ply roofing in Tiverton?
If a flat roof in Tiverton has poor falls and ponding, a single-ply re-roof with tapered insulation can correct both problems at once. The tapered boards build the fall into the insulation, and the membrane is laid over the top, with outlets set at the new low points.
In a town like Tiverton, flat roofs are commonly found on 1930s semis with flat-roofed garages and kitchen extensions or low-rise post-war blocks of flats. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.
How much does a single-ply roof cost in Tiverton?
For Tiverton we use South West rates: £13,650–£22,450 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £13,650–£22,450 |
| Single garage (18 m²), single-ply | £2,100–£3,450 |
| Single garage (18 m²), EPDM rubber | £1,650–£2,900 |
| Extension (20 m²), EPDM, new deck + insulation | £2,900–£5,050 |
Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?
Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.
| Method | How it works | Typical use |
|---|---|---|
| Mechanically fixed | Fasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheet | Metal, timber and concrete decks on commercial roofs |
| Adhered | Membrane bonded to the insulation or deck with adhesive | Domestic roofs, roofs where fixings are unsuitable |
| Ballasted | Loose-laid and held down by paving, gravel or a green roof | Inverted roofs, terraces, green roofs |
Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.
Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.
What's included?
- Hot-air welded seams, each probed along its full length
- Vapour control layer and warm-roof or tapered insulation as specified
- Strip-out or preparation of the existing roof, with waste removed
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Single-ply membrane roofing in Tiverton: questions
Do you cover Tiverton?
Yes. Tiverton is part of our Devon coverage, including postcode districts EX16. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Tiverton?
Where the work needs approval it goes to Mid Devon District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Tiverton?
£13,650–£22,450 for a 100 m² commercial roof in single-ply with insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can a single-ply roof be repaired?
Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.
Can single-ply be used on a house?
Yes. It can be used on garages, extensions and dormers, usually adhered rather than mechanically fixed. On small domestic roofs, though, EPDM or GRP is often more economical.