- Price per m²
- £84–£135
- Typical life
- 25–35+ years
- Manufacturer guarantees
- 20–25 year guarantees on specified systems
- Typical garage roof
- £1,900–£3,100
Tyne and Wear at a glance
- Largest towns
- Newcastle upon Tyne, Sunderland, South Shields, Washington
- Postcode areas
- DH, NE, SR
- Building control
- Newcastle City Council, Sunderland City Council, South Tyneside Council and 2 other councils
- Neighbouring areas
- Northumberland · County Durham · North Yorkshire · Cumbria
- Guide price region
- North East (−7% on West Midlands rates)
How much does a single-ply roof cost in Tyne and Wear?
Guide prices including VAT at North East rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £12,300–£20,250 |
| Single garage (18 m²), single-ply | £1,900–£3,100 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,600 |
| Extension (20 m²), EPDM, new deck + insulation | £2,600–£4,550 |
Which flat roofs are common in Tyne and Wear?
Flat roofs in Tyne and Wear sit on lock-up garage blocks on estates, shops with flat-roofed rear stores below flats and low-rise post-war blocks of flats. England averages roughly 870 mm of rain a year; the North East is drier than the west but cold and windy near the coast, so wind uplift and freeze-thaw are in the specification. Approximate 1991–2020 regional averages based on Met Office data.
Building regulations in England
Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Tyne and Wear the application goes to Newcastle City Council, Sunderland City Council, South Tyneside Council and 2 other councils. More on the rules.
How long does a single-ply roof last, and what guarantee comes with it?
A well-installed single-ply roof typically lasts 25 to 35 years or more. Its life depends mostly on the quality of the welds, the fixing pattern, protection from foot traffic and keeping outlets clear.
Signs of trouble on an older single-ply roof include seams lifting at the edges, shrinkage pulling at upstands and corners, punctures near plant, and loose fixings under the membrane on windy sites.
Manufacturer guarantees are available on many specified single-ply systems, and they often depend on a registered build-up, an inspection and sometimes an approved installer. Where the system allows, we complete that registration on your behalf. On every re-roof you also receive our written workmanship guarantee, with the length set out in the quote, and you can ask about insurance-backed options. See the guarantees guide and maintenance guide for more.
Is single-ply the right system for my roof?
Single-ply is usually the right system for medium and large flat roofs, such as shops, offices, units, surgeries, clubs and blocks, where speed of installation, light weight and long life matter. On a small domestic roof it can work well, though it is not always the most economical choice.
In its favour: lightweight; quick to lay over large areas; flame-free, as the seams are welded with hot air; long typical life; welded details at rooflights and plant; lighter-coloured membranes reflect more sunlight.
Against it: only one waterproof layer, so welding quality is critical; can be punctured by foot traffic or dropped tools without walkway protection; PVC needs separating from bitumen; repairs need compatible material and welding equipment.
For a small garage or extension, EPDM is often simpler. Where people walk regularly, GRP or a liquid system may be tougher. A multi-layer torch-on felt roof gives built-in redundancy, and on older buildings mastic asphalt may be the original material. Our commercial flat roofing page covers larger jobs.
Which towns in Tyne and Wear do we cover?
- Newcastle upon Tyne
- Sunderland
- South Shields
- Washington
- Wallsend
- Newburn
- Whitley Bay
- Houghton-Le-Spring
- Felling
- Jarrow
- Gosforth
- Whickham
- Blaydon-on-Tyne
Single-ply membrane roofing in Tyne and Wear: questions
Which towns in Tyne and Wear do you cover?
All of Tyne and Wear. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.
How much does a single-ply roof cost in Tyne and Wear?
£12,300–£20,250 for a 100 m² commercial roof in single-ply with insulation, at North East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Which postcode areas do you cover in Tyne and Wear?
All of Tyne and Wear, including the DH, NE, SR postcode areas. Send your full postcode and we'll confirm.
Does single-ply work with solar panels or a green roof?
Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.
How long does a commercial single-ply roof take?
A roof of around 100 m² typically takes several days, depending on strip-out, insulation, details and weather. Work is phased so the building stays weathertight and occupied areas are protected.
Can a single-ply roof be repaired?
Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.
Everything about single-ply membrane roofing → · All flat roofing in Tyne and Wear →