Felling at a glance
- Postcode districts
- NE10
- Population
- about 34,355 (GeoNames)
- Council area
- Gateshead Council
- Building approval
- Gateshead Council building control, or a registered building control approver
- Nearest main town
- Newcastle upon Tyne, about 2 miles
- Guide price region
- North East (−7% on West Midlands rates)
Why choose single-ply roofing in Felling?
If a flat roof in Felling has poor falls and ponding, a single-ply re-roof with tapered insulation can correct both problems at once. The tapered boards build the fall into the insulation, and the membrane is laid over the top, with outlets set at the new low points.
In and around Felling, flat roofs are typically found on terraced streets with flat-roofed rear kitchens and bathrooms, and on lock-up garage blocks on estates. England averages roughly 870 mm of rain a year; the North East is drier than the west but cold and windy near the coast, so wind uplift and freeze-thaw are in the specification.
How much does a single-ply roof cost in Felling?
For Felling we use North East rates: £12,300–£20,250 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £12,300–£20,250 |
| Single garage (18 m²), single-ply | £1,900–£3,100 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,600 |
| Extension (20 m²), EPDM, new deck + insulation | £2,600–£4,550 |
Is single-ply the right system for my roof?
Single-ply is usually the right system for medium and large flat roofs, such as shops, offices, units, surgeries, clubs and blocks, where speed of installation, light weight and long life matter. On a small domestic roof it can work well, though it is not always the most economical choice.
In its favour: lightweight; quick to lay over large areas; flame-free, as the seams are welded with hot air; long typical life; welded details at rooflights and plant; lighter-coloured membranes reflect more sunlight.
Against it: only one waterproof layer, so welding quality is critical; can be punctured by foot traffic or dropped tools without walkway protection; PVC needs separating from bitumen; repairs need compatible material and welding equipment.
For a small garage or extension, EPDM is often simpler. Where people walk regularly, GRP or a liquid system may be tougher. A multi-layer torch-on felt roof gives built-in redundancy, and on older buildings mastic asphalt may be the original material. Our commercial flat roofing page covers larger jobs.
What's included?
- Vapour control layer and warm-roof or tapered insulation as specified
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
- Strip-out or preparation of the existing roof, with waste removed
- Edge protection on every job and walkway protection around plant
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Newcastle upon Tyne · 2 mi
- Wallsend · 3 mi
- Gosforth · 4 mi
- Jarrow · 4 mi
- Whickham · 4 mi
- Washington · 4 mi
Single-ply membrane roofing in Felling: questions
Do you cover Felling?
Yes. Felling is part of our Tyne and Wear coverage, including postcode districts NE10. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Felling?
Where the work needs approval it goes to Gateshead Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Felling?
£12,300–£20,250 for a 100 m² commercial roof in single-ply with insulation, at North East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can a single-ply roof be repaired?
Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.
Can single-ply be used on a house?
Yes. It can be used on garages, extensions and dormers, usually adhered rather than mechanically fixed. On small domestic roofs, though, EPDM or GRP is often more economical.