Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Worthing

If you manage or own a commercial building in Worthing, single-ply is often the most practical way to replace a large flat roof. We phase the work so the building stays weathertight, protect occupied areas, and add insulation and tapered falls where the roof needs them. Guide prices are online.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Worthing at a glance

Postcode districts
BN11, BN12, BN13, BN14
Population
about 113,866 (GeoNames)
Council area
Worthing Borough Council
Building approval
Worthing Borough Council building control, or a registered building control approver
Nearest main town
Brighton, about 10 miles
Guide price region
South East (+10% on West Midlands rates)

Why choose single-ply roofing in Worthing?

On exposed sites in Worthing and elsewhere, mechanically fixed single-ply is specified with a fixing pattern based on wind uplift, with extra fasteners at corners and edges. That makes it a strong option for commercial roofs where wind loads are a concern.

In a large town like Worthing, flat roofs are commonly found on 1960s and 1970s link-detached houses with flat-roofed garages and porches or bungalows with flat-roofed side extensions and dormers. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.

How much does a single-ply roof cost in Worthing?

For Worthing we use South East rates: £14,550–£23,950 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£14,550–£23,950
Single garage (18 m²), single-ply£2,250–£3,650
Single garage (18 m²), EPDM rubber£1,750–£3,100
Extension (20 m²), EPDM, new deck + insulation£3,100–£5,350

What insulation and approvals does a single-ply re-roof need?

On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.

Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.

What's included?

  • Edge protection on every job and walkway protection around plant
  • Welded details at upstands, outlets, rooflight kerbs and edge trims
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
  • Vapour control layer and warm-roof or tapered insulation as specified

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Worthing: questions

Do you cover Worthing?

Yes. Worthing is part of our West Sussex coverage, including postcode districts BN11, BN12, BN13, BN14. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Worthing?

Where the work needs approval it goes to Worthing Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Worthing?

£14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Can a single-ply roof be repaired?

Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.

Other flat roof work in Worthing

Single-ply membrane roofing in Worthing: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price