Cambridge at a glance
- Postcode districts
- CB5, CB21, CB22, CB23, CB24
- Population
- about 145,674 (GeoNames)
- Council area
- Cambridge City Council
- Building approval
- Cambridge City Council building control, or a registered building control approver
- Guide price region
- East of England (+5% on West Midlands rates)
Why choose torch-on felt roofing in Cambridge?
For a commercial roof in Cambridge, such as a shop, surgery or club, torch-on felt offers a hard-wearing mineral finish that takes occasional maintenance traffic. Phased work keeps part of the building weathertight while the rest is re-roofed, so the business can usually keep trading.
In a large town like Cambridge, flat roofs are commonly found on shops with flat-roofed rear stores below flats or bungalows with flat-roofed side extensions and dormers. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof.
How much does a torch-on felt roof cost in Cambridge?
Guide price in Cambridge: £1,600–£2,750 for a typical 18 m² garage roof in torch-on felt, including VAT at East of England rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,600–£2,750 |
| Extension (20 m²), felt, new deck + insulation | £2,850–£4,900 |
| Block of flats (150 m²), felt + insulation + scaffold | £16,350–£28,550 |
| Single garage (18 m²), EPDM rubber | £1,700–£2,950 |
| Extension (20 m²), EPDM, new deck + insulation | £2,950–£5,150 |
Does replacing a felt roof mean upgrading the insulation?
Usually, yes, when the roof is over a heated space and more than half of it is being re-covered. In England, Wales and Northern Ireland that is renovation of a thermal element, which should be brought towards the renovation U-value where feasible; a Scottish project goes through the council's building standards service, which confirms whether a warrant applies.
A felt replacement is a good point to switch to a warm roof, with insulation laid above the deck under the new membranes. On larger roofs, tapered insulation can also correct poor falls that have caused ponding, which a patch repair cannot fix. Raising the roof level affects upstands and door thresholds, so we check heights at survey. Any approval is arranged by us as part of the job, and the building regulations page sets out the rules by nation.
What's included?
- Deck inspection with replacement of damaged boards
- Vapour control layer and warm-roof insulation where needed
- Mineral-finished cap sheet, upstands, outlets and edge trims
- Hot-works checks and fire watch on every torch-on job
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Torch-on felt roofing in Cambridge: questions
Do you cover Cambridge?
Yes. Cambridge is part of our Cambridgeshire coverage, including postcode districts CB5, CB21, CB22, CB23, CB24. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Cambridge?
Where the work needs approval it goes to Cambridge City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Cambridge?
£1,600–£2,750 for a typical 18 m² garage roof in torch-on felt, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Is torch-on suitable for a block of flats?
Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.
Can torch-on felt be laid in wet weather?
Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.
