Flat RoofingContractors

Flat roof systems

Torch-on felt roofing in Ballymena

We lay torch-on felt roofs in Ballymena for homeowners, landlords and commercial owners, using modern reinforced bitumen membranes in two or three bonded layers. A free survey comes first, then a fixed written quote. The work is done by vetted roofing teams working under S&K, with a fire watch after every torching session.

Roofer torching a slate-grey mineral cap sheet on a commercial flat roof behind edge protectionComputer-generated example image

Ballymena at a glance

Postcode districts
BT42, BT43, BT44
Population
about 28,932 (GeoNames)
Council area
Mid and East Antrim Borough Council
Building approval
Mid and East Antrim Borough Council building control
Guide price region
Northern Ireland (−12% on West Midlands rates)

Why choose torch-on felt roofing in Ballymena?

For a commercial roof in Ballymena, such as a shop, surgery or club, torch-on felt offers a hard-wearing mineral finish that takes occasional maintenance traffic. Phased work keeps part of the building weathertight while the rest is re-roofed, so the business can usually keep trading.

In a town like Ballymena, flat roofs are commonly found on low-rise post-war blocks of flats or newer estates where the first extension roofs are now being replaced. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.

How much does a torch-on felt roof cost in Ballymena?

Guide price in Ballymena: £1,350–£2,300 for a typical 18 m² garage roof in torch-on felt, including VAT at Northern Ireland rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), torch-on felt£1,350–£2,300
Extension (20 m²), felt, new deck + insulation£2,400–£4,100
Block of flats (150 m²), felt + insulation + scaffold£13,700–£23,950
Single garage (18 m²), EPDM rubber£1,400–£2,450
Extension (20 m²), EPDM, new deck + insulation£2,450–£4,300

Is torch-on roofing safe, and what is the difference between two- and three-layer systems?

Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:

  • check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
  • use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
  • keep fire extinguishers on the roof and the gas bottles secured and away from the work;
  • stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.

As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.

Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.

What's included?

  • Two- or three-layer reinforced bitumen membrane with staggered laps
  • Vapour control layer and warm-roof insulation where needed
  • Mineral-finished cap sheet, upstands, outlets and edge trims
  • Strip-off of the existing roof covering and removal of waste

Building control in Northern Ireland

In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.

Which nearby areas do we also cover?

Torch-on felt roofing in Ballymena: questions

Do you cover Ballymena?

Yes. Ballymena is part of our County Antrim coverage, including postcode districts BT42, BT43, BT44. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Ballymena?

Where the work needs approval it goes to Mid and East Antrim Borough Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a torch-on felt roof cost in Ballymena?

£1,350–£2,300 for a typical 18 m² garage roof in torch-on felt, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is torch-on suitable for a block of flats?

Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.

Can torch-on felt be laid in wet weather?

Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.

Other flat roof work in Ballymena

Torch-on felt roofing in Ballymena: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price