Flat RoofingContractors

Flat roof systems

Torch-on felt roofing in Accrington

Across Lancashire, including Accrington, we use torch-on felt on roofs where a proven, multi-layer system makes sense. The surveyor checks the deck, the falls and any timber near the edges before recommending two or three layers, and every detail is set out in your fixed written quote.

Roofer torching a slate-grey mineral cap sheet on a commercial flat roof behind edge protectionComputer-generated example image

Accrington at a glance

Postcode districts
BB5, BB6
Population
about 34,897 (GeoNames)
Council area
Hyndburn Borough Council
Building approval
Hyndburn Borough Council building control, or a registered building control approver
Nearest main town
Blackburn, about 5 miles
Guide price region
North West (−5% on West Midlands rates)

Why choose torch-on felt roofing in Accrington?

For a commercial roof in Accrington, such as a shop, surgery or club, torch-on felt offers a hard-wearing mineral finish that takes occasional maintenance traffic. Phased work keeps part of the building weathertight while the rest is re-roofed, so the business can usually keep trading.

Accrington's flat roofs are mostly on shops with flat-roofed rear stores below flats, with plenty on 1960s and 1970s link-detached houses with flat-roofed garages and porches too. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour.

How much does a torch-on felt roof cost in Accrington?

Guide price in Accrington: £1,450–£2,500 for a typical 18 m² garage roof in torch-on felt, including VAT at North West rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), torch-on felt£1,450–£2,500
Extension (20 m²), felt, new deck + insulation£2,550–£4,450
Block of flats (150 m²), felt + insulation + scaffold£14,750–£25,850
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Is torch-on roofing safe, and what is the difference between two- and three-layer systems?

Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:

  • check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
  • use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
  • keep fire extinguishers on the roof and the gas bottles secured and away from the work;
  • stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.

As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.

Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.

What's included?

  • Vapour control layer and warm-roof insulation where needed
  • Two- or three-layer reinforced bitumen membrane with staggered laps
  • Deck inspection with replacement of damaged boards
  • Mineral-finished cap sheet, upstands, outlets and edge trims

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Torch-on felt roofing in Accrington: questions

Do you cover Accrington?

Yes. Accrington is part of our Lancashire coverage, including postcode districts BB5, BB6. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Accrington?

Where the work needs approval it goes to Hyndburn Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a torch-on felt roof cost in Accrington?

£1,450–£2,500 for a typical 18 m² garage roof in torch-on felt, at North West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can torch-on felt be laid in wet weather?

Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.

Is torch-on suitable for a block of flats?

Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.

Other flat roof work in Accrington

Torch-on felt roofing in Accrington: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price