Selby at a glance
- Postcode districts
- YO8
- Population
- about 24,859 (GeoNames)
- Council area
- North Yorkshire Council
- Building approval
- North Yorkshire Council building control, or a registered building control approver
- Nearest main town
- York, about 12 miles
- Guide price region
- Yorkshire and the Humber (−5% on West Midlands rates)
Why choose torch-on felt roofing in Selby?
Torch-on felt suits property owners in Selby who want a dependable, layered roof without paying the top price per square metre. With two or three bonded layers, a single small defect in one sheet need not lead to a leak, which is a real advantage on larger roofs that are hard to inspect often.
Around Selby, flat roofs are common on newer estates where the first extension roofs are now being replaced and on 1930s semis with flat-roofed garages and kitchen extensions. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.
How much does a torch-on felt roof cost in Selby?
At Yorkshire and the Humber guide rates, a typical 18 m² garage roof in torch-on felt comes to £1,450–£2,500 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,450–£2,500 |
| Extension (20 m²), felt, new deck + insulation | £2,550–£4,450 |
| Block of flats (150 m²), felt + insulation + scaffold | £14,750–£25,850 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
Is torch-on roofing safe, and what is the difference between two- and three-layer systems?
Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:
- check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
- use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
- keep fire extinguishers on the roof and the gas bottles secured and away from the work;
- stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.
As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.
Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.
What's included?
- Two- or three-layer reinforced bitumen membrane with staggered laps
- Vapour control layer and warm-roof insulation where needed
- Mineral-finished cap sheet, upstands, outlets and edge trims
- Deck inspection with replacement of damaged boards
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Torch-on felt roofing in Selby: questions
Do you cover Selby?
Yes. Selby is part of our North Yorkshire coverage, including postcode districts YO8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Selby?
Where the work needs approval it goes to North Yorkshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Selby?
£1,450–£2,500 for a typical 18 m² garage roof in torch-on felt, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Is torch-on suitable for a block of flats?
Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.
How long does it take to lay a torch-on felt roof?
A garage roof typically takes one to two days and an insulated extension two to three. Larger roofs and blocks are phased over longer, with each area made weathertight before the team leaves.