Warminster at a glance
- Postcode districts
- BA12
- Population
- about 17,490 (GeoNames)
- Council area
- Wiltshire Council
- Building approval
- Wiltshire Council building control, or a registered building control approver
- Nearest main town
- Bath, about 14 miles
- Guide price region
- South West (+3% on West Midlands rates)
Why upgrade to a warm roof in Warminster?
Many flat-roofed extensions and dormers in Warminster were built with little or no insulation, or with a cold roof that was never properly ventilated. Those rooms are often hard to heat in winter and can suffer condensation, mould and, in time, a rotten deck.
In a town like Warminster, flat roofs are commonly found on lock-up garage blocks on estates or bungalows with flat-roofed side extensions and dormers. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.
How much does a warm roof upgrade cost in Warminster?
For Warminster we use South West rates: £2,900–£5,050 is the guide for a 20 m² extension roof in EPDM with a new deck and insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), EPDM, new deck + insulation | £2,900–£5,050 |
| Extension (20 m²), EPDM with sedum green roof | £4,550–£8,350 |
Do I have to insulate my flat roof when I replace it?
Usually, yes, if the roof is over a heated room and you are replacing more than half of its covering. In England, Wales and Northern Ireland, that counts as renovating a thermal element, so the roof should be upgraded to the renovation standard where that is technically, functionally and economically feasible.
The rules don't usually apply to patch repairs, or to an unheated, detached garage. The target U-value depends on where you live:
| Nation | Roof renovation target |
|---|---|
| England | 0.16 W/m²K (homes), 0.18 (non-domestic) |
| Wales | 0.16 W/m²K |
| Scotland | Section 6 framework, with a domestic benchmark of 0.12 W/m²K pursued as far as reasonably practicable |
| Northern Ireland | 0.18 W/m²K |
A new extension roof has a tighter target than a renovation: 0.15 in England and 0.13 in Wales. The economic test in England's guidance is a simple payback within 15 years. We handle building control or building standards where it is needed. The building regulations page sets out the approval routes in each nation.
What's included?
- Rigid insulation boards sized to the U-value target
- New waterproofing, with a written workmanship guarantee
- Survey of the deck, joists and existing insulation
- Upstands, trims and kerbs reset to the new roof level
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Warm roof insulation upgrades in Warminster: questions
Do you cover Warminster?
Yes. Warminster is part of our Wiltshire coverage, including postcode districts BA12. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Warminster?
Where the work needs approval it goes to Wiltshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a warm roof upgrade cost in Warminster?
£2,900–£5,050 for a 20 m² extension roof in EPDM with a new deck and insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Does a warm roof stop condensation?
It greatly reduces the risk by keeping the deck warm and placing a vapour control layer on the warm side. Good ventilation in kitchens and bathrooms below still helps.
How thick does flat roof insulation need to be?
It depends on the insulation product and the U-value target. With common PIR boards, meeting a renovation target usually means well over 100 mm. Thinner, higher-performance boards are available where height is tight.