Mold at a glance
- Postcode districts
- CH7
- Population
- about 10,058 (GeoNames)
- Council area
- Flintshire County Council
- Building approval
- Flintshire County Council building control, or a registered building control approver
- Nearest main town
- Buckley, about 2 miles
- Guide price region
- Wales (−8% on West Midlands rates)
When should a flat roof in Mold be replaced?
Flat roofs in Mold get replaced for the same reasons as anywhere else: the covering has reached the end of its service life, leaks keep returning after repairs, or water ponds because the deck has sagged. Once the boards are soft or the insulation is wet, a full strip usually costs less than another round of patching.
Around Mold, flat roofs are common on newer estates where the first extension roofs are now being replaced and on bungalows with flat-roofed side extensions and dormers. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a flat roof replacement cost in Mold?
For Mold we use Wales rates: £2,600–£4,500 is the guide for a 20 m² extension roof in EPDM with a new deck and insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), EPDM, new deck + insulation | £2,600–£4,500 |
| Single garage (18 m²), torch-on felt | £1,400–£2,400 |
| Extension (20 m²), GRP, new deck + insulation | £2,750–£4,950 |
| Single garage (18 m²), EPDM rubber | £1,450–£2,600 |
Do I need building regulations approval to replace a flat roof?
Often, yes. Replacing the covering of a flat roof over a heated room is usually treated as renovating a thermal element, which brings insulation requirements and, in most cases, approval.
In England, if more than half of that roof is renovated, the whole roof should be upgraded towards a U-value of 0.16 W/m²K for homes (0.18 for non-domestic buildings) where that is technically, functionally and economically feasible, judged against a simple payback of 15 years. Approval comes from building control or self-certification through a registered competent person scheme. Structural changes, or a covering that adds 15% or more to the roof's weight, also need approval.
The other nations differ: most re-roofing in Wales needs approval, Scotland works through building standards and the building warrant, and in Northern Ireland you contact the district council's building control first. An unheated detached garage is not normally a thermal element. Planning permission is not usually needed if the roof looks much the same afterwards, though listed buildings and conservation areas are different. We handle approvals where needed; see building regulations.
What's included?
- New deck, firrings and warm-roof insulation where needed
- Strip-out of the old covering, with waste and skip
- Building control handled where needed, plus a written workmanship guarantee
- Fixed written quote listing the full build-up
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
Flat roof replacement in Mold: questions
Do you cover Mold?
Yes. Mold is part of our Flintshire coverage, including postcode districts CH7. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Mold?
Where the work needs approval it goes to Flintshire County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a flat roof replacement cost in Mold?
£2,600–£4,500 for a 20 m² extension roof in EPDM with a new deck and insulation, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Will a new flat roof be better insulated than the old one?
If it is over a heated room, yes. A full replacement usually has to be upgraded towards current insulation levels where feasible, and we build it as a warm roof with the insulation above the deck.
Do I need to be at home while the roof is replaced?
Not for most of the job, as long as the team can reach the roof and there is room for a skip. We ask you to be there at the start to agree the plan and at the end to look over the finished roof.