Mold at a glance
- Postcode districts
- CH7
- Population
- about 10,058 (GeoNames)
- Council area
- Flintshire County Council
- Building approval
- Flintshire County Council building control, or a registered building control approver
- Nearest main town
- Buckley, about 2 miles
- Guide price region
- Wales (−8% on West Midlands rates)
What do block and HMO roofs in Mold need?
Roof works on a block in Mold affect many households at once. We agree notices, scaffold positions, working hours and a named contact with the agent or freeholder before we start, so residents know what is happening, when it will happen and who to ask if they have a question.
In a town like Mold, flat roofs are commonly found on 1930s semis with flat-roofed garages and kitchen extensions or low-rise post-war blocks of flats. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a block or HMO roof cost in Mold?
At Wales guide rates, a 150 m² block-of-flats roof in felt with insulation and scaffold comes to £14,300–£25,000 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Block of flats (150 m²), felt + insulation + scaffold | £14,300–£25,000 |
| Commercial roof (100 m²), single-ply + insulation | £12,150–£20,050 |
Which roofing systems last longest on a block of flats?
Mastic asphalt, EPDM, single-ply and high-performance built-up felt all give long service lives on block roofs; the right choice depends on the deck, how the roof is used, the details and the whole-life cost.
- Mastic asphalt: 30–60 years with maintenance, common on concrete-decked blocks and walkways. See mastic asphalt roofing.
- EPDM: 25–50 years, laid in large sheets with few joins.
- Single-ply: 25–35+ years, quick to lay on larger roofs, with welded laps. See single-ply roofing.
- Built-up felt: 15–25 years for modern torch-on systems and longer for high-performance systems, robust where maintenance teams walk the roof.
- Liquid-applied: 10–25+ years by product, useful as an overlay on a sound roof with complex details.
The cheapest roof today is not always the cheapest over the life of the building. A longer-life system, with tapered insulation to cure ponding, can mean fewer reactive repairs and fewer rounds of consultation. These lives are indicative and assume good specification and regular maintenance.
What's included?
- Long-life systems: mastic asphalt, EPDM, single-ply and built-up felt
- Resident notices, access planning and phased work
- Building control and insulation upgrades handled where needed
- Quotes laid out to support leaseholder consultation
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
Flats, HMOs and block roofs in Mold: questions
Do you cover Mold?
Yes. Mold is part of our Flintshire coverage, including postcode districts CH7. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Mold?
Where the work needs approval it goes to Flintshire County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a block or HMO roof cost in Mold?
£14,300–£25,000 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Do you run the Section 20 consultation?
No. The freeholder or managing agent runs the consultation; we provide itemised written quotes that can be shared with leaseholders and answer technical questions passed on through the agent.
Does a block roof replacement need building control?
Usually, yes. Re-covering more than half of a roof over heated flats normally triggers the thermal element rules, which bring insulation and approval requirements, and we handle building control or building standards where it is needed.