Deeside at a glance
- Postcode districts
- CH5
- Population
- about 32,000 (GeoNames)
- Council area
- Flintshire County Council
- Building approval
- Flintshire County Council building control, or a registered building control approver
- Nearest main town
- Buckley, about 3 miles
- Guide price region
- Wales (−8% on West Midlands rates)
What do block and HMO roofs in Deeside need?
Roof works on a block in Deeside affect many households at once. We agree notices, scaffold positions, working hours and a named contact with the agent or freeholder before we start, so residents know what is happening, when it will happen and who to ask if they have a question.
In a town like Deeside, flat roofs are commonly found on newer estates where the first extension roofs are now being replaced or bungalows with flat-roofed side extensions and dormers. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a block or HMO roof cost in Deeside?
At Wales guide rates, a 150 m² block-of-flats roof in felt with insulation and scaffold comes to £14,300–£25,000 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Block of flats (150 m²), felt + insulation + scaffold | £14,300–£25,000 |
| Commercial roof (100 m²), single-ply + insulation | £12,150–£20,050 |
Do fire and insulation rules affect block roofs?
Yes. Where a roof is close to a boundary, building regulations limit which coverings can be used, and the build-up should carry a suitable external fire classification such as BROOF(t4); in England this is covered by Approved Document B.
BROOF(t4) applies to a tested build-up, so we check that the manufacturer's classification covers the deck, insulation and membrane actually being installed, not just the membrane name. Where the roof crosses a separating or compartment wall, the fire-stopping detail is kept intact.
Re-covering more than half of a roof over heated flats usually triggers the thermal element rules, so the insulation is upgraded towards the renovation U-value where feasible: 0.16 W/m²K for dwellings in England and Wales. We handle building control where it is needed. See building regulations and warm vs cold roofs.
What's included?
- Free survey and fixed, itemised written quote
- Long-life systems: mastic asphalt, EPDM, single-ply and built-up felt
- Building control and insulation upgrades handled where needed
- Resident notices, access planning and phased work
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
Flats, HMOs and block roofs in Deeside: questions
Do you cover Deeside?
Yes. Deeside is part of our Flintshire coverage, including postcode districts CH5. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Deeside?
Where the work needs approval it goes to Flintshire County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a block or HMO roof cost in Deeside?
£14,300–£25,000 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can you quote for more than one roofing system?
Yes. We can price two or more systems on the same scope, for example built-up felt and single-ply, so leaseholders and the freeholder can compare cost against expected service life.
Does a block roof replacement need building control?
Usually, yes. Re-covering more than half of a roof over heated flats normally triggers the thermal element rules, which bring insulation and approval requirements, and we handle building control or building standards where it is needed.