Flint at a glance
- Postcode districts
- CH6
- Population
- about 26,442 (GeoNames)
- Council area
- Flintshire County Council
- Building approval
- Flintshire County Council building control, or a registered building control approver
- Nearest main town
- Buckley, about 6 miles
- Guide price region
- Wales (−8% on West Midlands rates)
What do block and HMO roofs in Flint need?
Roof works on a block in Flint affect many households at once. We agree notices, scaffold positions, working hours and a named contact with the agent or freeholder before we start, so residents know what is happening, when it will happen and who to ask if they have a question.
In a town like Flint, flat roofs are commonly found on terraced streets with flat-roofed rear kitchens and bathrooms or 1930s semis with flat-roofed garages and kitchen extensions. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a block or HMO roof cost in Flint?
At Wales guide rates, a 150 m² block-of-flats roof in felt with insulation and scaffold comes to £14,300–£25,000 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Block of flats (150 m²), felt + insulation + scaffold | £14,300–£25,000 |
| Commercial roof (100 m²), single-ply + insulation | £12,150–£20,050 |
How do you manage access and residents during the work?
We agree an access and communication plan with the agent or freeholder before the scaffold goes up, so residents know what is happening and when.
That usually covers notices in the common parts and letters to each flat, scaffold and skip positions, keeping entrances, escape routes and bin stores clear, working hours, securing the scaffold out of hours, and a named contact for questions. If we need to look at a ceiling inside a top-floor flat, we arrange access through the agent or landlord.
Occupied blocks are re-roofed in phases, with each section watertight before the team leaves site, which also lets a larger roof be spread over more than one service charge year. Hot works near windows, vents and escape routes are tightly controlled, or avoided altogether with cold-applied systems.
What's included?
- Building control and insulation upgrades handled where needed
- Free survey and fixed, itemised written quote
- Quotes laid out to support leaseholder consultation
- Resident notices, access planning and phased work
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
Flats, HMOs and block roofs in Flint: questions
Do you cover Flint?
Yes. Flint is part of our Flintshire coverage, including postcode districts CH6. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Flint?
Where the work needs approval it goes to Flintshire County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a block or HMO roof cost in Flint?
£14,300–£25,000 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Do you work for HMO landlords?
Yes. We replace and repair flat roofs on HMOs and converted flats, arrange access with tenants through the landlord or agent, and keep escape routes and entrances clear while we work.
Can a block roof be replaced in phases?
Yes. Larger roofs can be split into sections over one or more budget years, with each phase priced separately and each section left watertight before the team leaves site.