Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Exmouth

For a fibreglass flat roof in Exmouth, the price depends on size, access, the new deck and any insulation needed. You can get a guide figure from our online tool in a couple of minutes. After a free survey, we confirm a fixed price in writing and agree a start date that leaves room for the weather.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Exmouth at a glance

Postcode districts
EX8
Population
about 36,204 (GeoNames)
Council area
East Devon District Council
Building approval
East Devon District Council building control, or a registered building control approver
Nearest main town
Exeter, about 9 miles
Guide price region
South West (+3% on West Midlands rates)

Why choose GRP fibreglass roofing in Exmouth?

Landlords and small businesses in Exmouth often favour GRP on roofs that contractors need to access for plant, aerials or gutter clearance. The surface resists scuffs better than a soft membrane, and small damage can usually be ground back and re-laminated without disturbing the rest of the roof.

In a town like Exmouth, flat roofs are commonly found on bungalows with flat-roofed side extensions and dormers or lock-up garage blocks on estates. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.

How much does a GRP fibreglass roof cost in Exmouth?

Guide price in Exmouth: £3,100–£5,550 for a 20 m² extension roof in GRP with a new deck and insulation, including VAT at South West rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£3,100–£5,550
Dormer (8 m²), GRP, scaffold£1,450–£2,750
Single garage (18 m²), GRP fibreglass£1,850–£3,350
Single garage (18 m²), EPDM rubber£1,650–£2,900
Extension (20 m²), EPDM, new deck + insulation£2,900–£5,050

Is GRP better than EPDM, felt or a liquid roof?

GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.

Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.

Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.

For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.

What's included?

  • Moulded GRP trims, kerbs and upstands
  • New OSB3 or plywood deck, fixed at close centres
  • Coloured UV-stable topcoat, with anti-slip finish on request
  • Warm-roof insulation and vapour control layer where the room below is heated

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Exmouth: questions

Do you cover Exmouth?

Yes. Exmouth is part of our Devon coverage, including postcode districts EX8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Exmouth?

Where the work needs approval it goes to East Devon District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Exmouth?

£3,100–£5,550 for a 20 m² extension roof in GRP with a new deck and insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is GRP suitable for a dormer roof?

Yes, GRP is commonly used on dormers because the trims can be moulded neatly and the finish looks tidy from the ground. Scaffold is normally needed, which we include in the quote.

How long before a new GRP roof is fully cured?

The topcoat is usually touch-dry within hours in reasonable weather, but full cure takes longer in cold conditions. We advise keeping off the roof until the team confirms it is ready.

Other flat roof work in Exmouth

GRP fibreglass roofing in Exmouth: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price