Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Plymstock

If you own a home or building in Plymstock and want a flat roof you can step onto for maintenance, GRP is worth considering. Our teams fit it across Devon, starting with a free survey and a fixed quote. Guide prices are available online, and the final figure is confirmed in writing before any work is booked.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Plymstock at a glance

Postcode districts
PL9
Population
about 24,103 (GeoNames)
Council area
Plymouth City Council
Building approval
Plymouth City Council building control, or a registered building control approver
Nearest main town
Plymouth, about 2 miles
Guide price region
South West (+3% on West Midlands rates)

Why choose GRP fibreglass roofing in Plymstock?

Landlords and small businesses in Plymstock often favour GRP on roofs that contractors need to access for plant, aerials or gutter clearance. The surface resists scuffs better than a soft membrane, and small damage can usually be ground back and re-laminated without disturbing the rest of the roof.

In a town like Plymstock, flat roofs are commonly found on low-rise post-war blocks of flats or terraced streets with flat-roofed rear kitchens and bathrooms. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.

How much does a GRP fibreglass roof cost in Plymstock?

At South West guide rates, a 20 m² extension roof in GRP with a new deck and insulation comes to £3,100–£5,550 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£3,100–£5,550
Dormer (8 m²), GRP, scaffold£1,450–£2,750
Single garage (18 m²), GRP fibreglass£1,850–£3,350
Single garage (18 m²), EPDM rubber£1,650–£2,900
Extension (20 m²), EPDM, new deck + insulation£2,900–£5,050

Is GRP better than EPDM, felt or a liquid roof?

GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.

Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.

Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.

For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.

What's included?

  • Coloured UV-stable topcoat, with anti-slip finish on request
  • Removal of the old covering and disposal of waste
  • Warm-roof insulation and vapour control layer where the room below is heated
  • Resin and glass-mat laminate with taped and reinforced joints

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Plymstock: questions

Do you cover Plymstock?

Yes. Plymstock is part of our Devon coverage, including postcode districts PL9. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Plymstock?

Where the work needs approval it goes to Plymouth City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Plymstock?

£3,100–£5,550 for a 20 m² extension roof in GRP with a new deck and insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

What colours does a GRP roof come in?

Topcoats are typically available in greys, greens, black and some other shades. Lighter colours absorb less heat, and an anti-slip finish can be added where people will walk on the roof.

Can GRP be laid over an existing felt roof?

Generally no. GRP needs a clean, dry, rigid timber deck, so the old felt is usually stripped and the boards replaced before laminating.

Other flat roof work in Plymstock

GRP fibreglass roofing in Plymstock: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price