Flat RoofingContractors

Flat roof systems

Liquid-applied roofing in Bedlington

We apply liquid roofing systems in Bedlington to balconies, garages, extension roofs and roofs crowded with pipes and vents. A free survey comes first, including checks for trapped moisture and adhesion, so we can tell you plainly whether your roof can be overlaid or should be stripped. A fixed written quote follows.

Grey liquid waterproofing and reinforcement fleece rolled around a vent pipe on a flat roofComputer-generated example image

Bedlington at a glance

Postcode districts
NE22
Population
about 18,470 (GeoNames)
Council area
Northumberland County Council
Building approval
Northumberland County Council building control, or a registered building control approver
Nearest main town
Blyth, about 3 miles
Guide price region
North East (−7% on West Midlands rates)

Why choose a liquid-applied roof in Bedlington?

If a flat roof in Bedlington is ageing but still dry, firmly bonded and on a sound deck, a reinforced liquid system can be applied over it. That avoids the cost and mess of a full strip-out, provided the moisture and adhesion checks at survey show the existing roof is fit to build on.

In a town like Bedlington, flat roofs are commonly found on bungalows with flat-roofed side extensions and dormers or newer estates where the first extension roofs are now being replaced. England averages roughly 870 mm of rain a year; the North East is drier than the west but cold and windy near the coast, so wind uplift and freeze-thaw are in the specification.

How much does a liquid-applied roof cost in Bedlington?

For Bedlington we use North East rates: £1,900–£3,000 is the guide for a typical 18 m² garage roof in a liquid-applied system, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), liquid-applied£1,900–£3,000
Balcony (12 m²), liquid-applied, scaffold£1,750–£3,000
Single garage (18 m²), EPDM rubber£1,500–£2,600
Extension (20 m²), EPDM, new deck + insulation£2,600–£4,550

When is a liquid roof the best option, and when is it not?

A liquid roof is often the best option for roofs crowded with pipes, vents and upstands, for balconies and walkways, and for overlaying a structurally sound roof that is starting to fail. It is the wrong choice when the deck is rotten, the insulation is wet or the falls are badly wrong.

Advantages: continuous finish with no laps; forms details around pipes and odd shapes easily; cold-applied with no flame; can often go over felt, asphalt or concrete; some systems take foot traffic.

Disadvantages: higher cost per square metre than felt or EPDM; needs dry weather and careful thickness control; only as good as the surface it is bonded to; product quality varies widely across the market.

For a straightforward re-roof on a fresh deck, EPDM or GRP may offer better value. Larger flat areas suit torch-on felt or single-ply. On a sound mastic asphalt roof, a compatible liquid system can sometimes be applied over it. See also our guide to overlay or strip.

What's included?

  • Detailing of upstands, outlets, pipes and corners before the main area
  • Surface cleaning, repairs and removal of loose material
  • Survey of the existing roof, including moisture and adhesion checks
  • Top coat with optional anti-slip finish, and guarantee registration where available

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Liquid-applied roofing in Bedlington: questions

Do you cover Bedlington?

Yes. Bedlington is part of our Northumberland coverage, including postcode districts NE22. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Bedlington?

Where the work needs approval it goes to Northumberland County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a liquid-applied roof cost in Bedlington?

£1,900–£3,000 for a typical 18 m² garage roof in a liquid-applied system, at North East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can liquid roofing stop a leak on a flat roof?

It can, if the leak is at a detail or the membrane is worn but the roof beneath is sound. If water has soaked the insulation or deck, coating over it will not cure the problem.

How long does a liquid roof take to cure?

That depends on the product and the weather. Some systems are rain-resistant within an hour or so, others take longer, and full cure can take a day or more in cool weather.

Other flat roof work in Bedlington

Liquid-applied roofing in Bedlington: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price