Flat RoofingContractors

Repairs and surveys

Edge trims, outlets and drainage across Wiltshire

If your flat roof in Wiltshire has lifted trims, a rotting fascia, overflowing gutters or water that won't drain away, it's worth having the edges and drainage looked at before the problem reaches the inside of the building. We'll tell you whether a targeted repair will do, or whether the roof needs more.

Aluminium drip trim discharging into a new black gutter beside a roof outlet on a rubber flat roofComputer-generated example image
Guide price
£120–£360
Repair price
Confirmed once the leak or damage is found
Condition survey report
£150–£310
Coverage
England, Wales, Scotland, NI

Wiltshire at a glance

Largest towns
Swindon, Salisbury, Trowbridge, Chippenham
Postcode areas
BA, SN, SP
Building control
Swindon Borough Council and Wiltshire Council
Neighbouring areas
Bristol · Gloucestershire · Somerset · Dorset
Guide price region
South West (+3% on West Midlands rates)

How much does a new roof edge or outlet cost in Wiltshire?

Guide prices including VAT at South West rates. We confirm the price once we've traced the leak or seen the damage.

JobGuide price inc VAT
Outlet or drainage repair£120–£360
Localised patch repair£150–£520
Upstand or flashing repair£260–£670
Emergency temporary weatherproofing visit£190–£460
Condition survey and leak investigation£150–£310

Which flat roofs are common in Wiltshire?

Flat roofs in Wiltshire sit on newer estates where the first extension roofs are now being replaced, 1960s and 1970s link-detached houses with flat-roofed garages and porches and low-rise post-war blocks of flats. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Wiltshire the application goes to Swindon Borough Council and Wiltshire Council. More on the rules.

Do flat roofs need overflows?

Roofs that drain to internal outlets or behind parapets should normally have an overflow, so that if an outlet blocks, water spills somewhere visible instead of rising over the upstands and into the building.

An overflow is usually a spout or weir set through the parapet or kerb at a level below the top of the upstands. When water runs from it, that is a sign the main outlet is blocked or overloaded. On a simple roof that drains over a drip trim into an external gutter, the open edge itself does the same job.

We look at where the water goes in heavy rain, how many outlets the roof has for its size, and whether the outlets, hoppers and downpipes are clear and properly connected. Leaf guards on outlets help on roofs near trees, as long as they are cleared regularly.

How long do flat roof trims and outlets last?

Properly fixed GRP or aluminium trims and well-installed outlets should last about as long as the waterproofing they are part of. What shortens their life is poor fixing, movement in a rotten deck edge and blockages that are never cleared.

A quick check of outlets and gutters each autumn, and again after storms, prevents most drainage problems. Look for leaves and silt in outlets, gutters pulling away from the fascia, trims that have lifted or split at joints and staining on the wall below the edge. The maintenance guide lists what to check and when. Only check what you can see safely from the ground, a window or a ladder at the edge, and never walk on a roof that isn't designed for it.

Which towns in Wiltshire do we cover?

Edge trims, outlets and drainage in Wiltshire: questions

Which towns in Wiltshire do you cover?

All of Wiltshire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a new roof edge or outlet cost in Wiltshire?

£120–£360 for an outlet or drainage repair, at South West guide rates including VAT. We confirm the price once we've traced the leak or seen the damage.

Which council handles building control for a flat roof in Wiltshire?

It depends on where the roof is: in Wiltshire that's Swindon Borough Council and Wiltshire Council. Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. We confirm which applies at the survey.

Is some standing water on a flat roof normal?

A thin film that clears within a day or two of rain is common and usually harmless. Deeper water that lingers for days points to poor falls, a sagging deck or a blocked outlet and should be looked at.

How often should flat roof outlets be cleared?

At least once a year, ideally in autumn after the leaves fall, and more often for roofs under trees. A quick check after heavy storms is also worthwhile.

Can a flat roof be re-laid with better falls?

Yes, as part of a replacement. Falls are corrected with tapered firring pieces under a new deck or with tapered insulation in a warm roof build-up.

Everything about edge trims, outlets and drainage → · All flat roofing in Wiltshire →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price