Antrim at a glance
- Postcode districts
- BT41
- Population
- about 19,661 (GeoNames)
- Council area
- Antrim and Newtownabbey Borough Council
- Building approval
- Antrim and Newtownabbey Borough Council building control
- Nearest main town
- Belfast, about 14 miles
- Guide price region
- Northern Ireland (−12% on West Midlands rates)
Why choose single-ply roofing in Antrim?
On exposed sites in Antrim and elsewhere, mechanically fixed single-ply is specified with a fixing pattern based on wind uplift, with extra fasteners at corners and edges. That makes it a strong option for commercial roofs where wind loads are a concern.
Around Antrim, flat roofs are common on terraced streets with flat-roofed rear kitchens and bathrooms and on shops with flat-roofed rear stores below flats. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.
How much does a single-ply roof cost in Antrim?
For Antrim we use Northern Ireland rates: £11,650–£19,150 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £11,650–£19,150 |
| Single garage (18 m²), single-ply | £1,800–£2,950 |
| Single garage (18 m²), EPDM rubber | £1,400–£2,450 |
| Extension (20 m²), EPDM, new deck + insulation | £2,450–£4,300 |
What insulation and approvals does a single-ply re-roof need?
On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.
Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.
What's included?
- Strip-out or preparation of the existing roof, with waste removed
- Edge protection on every job and walkway protection around plant
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
- Vapour control layer and warm-roof or tapered insulation as specified
Building control in Northern Ireland
In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.
Which nearby areas do we also cover?
- Ballyclare · 9 mi
- Ballymena · 10 mi
- Newtownabbey · 13 mi
- Belfast · 14 mi
- Lisburn · 15 mi
- Magherafelt · 16 mi
Single-ply membrane roofing in Antrim: questions
Do you cover Antrim?
Yes. Antrim is part of our County Antrim coverage, including postcode districts BT41. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Antrim?
Where the work needs approval it goes to Antrim and Newtownabbey Borough Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Antrim?
£11,650–£19,150 for a 100 m² commercial roof in single-ply with insulation, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
How long does a commercial single-ply roof take?
A roof of around 100 m² typically takes several days, depending on strip-out, insulation, details and weather. Work is phased so the building stays weathertight and occupied areas are protected.
What is the difference between PVC and TPO roofing?
Both are thermoplastic single-ply membranes welded with hot air. PVC contains plasticisers and usually needs separating from bitumen, while TPO and FPO are polyolefin-based; the right one depends on the roof and the system specified.