Torch-on felt roofing across Hampshire

Price per m²

£66–£116

Typical life

15–25 years

Manufacturer guarantees

10–20 year material guarantees on specified systems

Typical garage roof

£1,650–£2,900

How much does a torch-on felt roof cost in Hampshire?

Guide prices including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

Which flat roofs are common in Hampshire?

Flat roofs in Hampshire sit on shops with flat-roofed rear stores below flats, terraced streets with flat-roofed rear kitchens and bathrooms and low-rise post-war blocks of flats. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Hampshire the application goes to Southampton City Council, Portsmouth City Council, Basingstoke and Deane Borough Council and 10 other councils. More on the rules.

Is torch-on roofing safe, and what is the difference between two- and three-layer systems?

Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:

• check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
• use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
• keep fire extinguishers on the roof and the gas bottles secured and away from the work;
• stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.

As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.

Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.

How long does a torch-on felt roof last, and what is the guarantee?

A modern torch-on roof typically lasts 15 to 25 years, and high-performance systems with better membranes can last longer. That is a big step up from older felt roofs, which were often single-layer, unreinforced or poorly bonded.

What shortens the life of a felt roof is usually visible: mineral chippings worn away so the bitumen is exposed to sunlight, blisters where moisture was trapped, split laps, and upstands that have slumped or pulled away from the wall. Ponding speeds all of this up.

Manufacturer material guarantees are available on many specified torch-on systems; they often depend on a particular build-up and registration, which we handle where the system allows. Every re-roof also comes with our written workmanship guarantee, the length of which is stated in the quote, and insurance-backed options can be discussed. Our flat roof lifespan guide compares felt with the other systems.

Which towns in Hampshire do we cover?

• Southampton
• Portsmouth
• Basingstoke
• Gosport
• Waterlooville
• Farnborough
• Eastleigh
• Winchester
• Havant
• Andover
• Fareham
• Aldershot
• Fleet
• Totton
• New Milton
• Bordon
• Hythe
• Yateley
• Alton
• Emsworth
• Hedge End
• Romsey
• Hayling Island
• Tadley

Everything about torch-on felt roofing → · All flat roofing in Hampshire →