Liquid-applied roofing across Kent

Price per m²

£99–£154

Typical life

10–25+ years by product

Manufacturer guarantees

10, 15 or 20-year guarantees by named system

Typical garage roof

£2,250–£3,600

How much does a liquid-applied roof cost in Kent?

Guide prices including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

Which flat roofs are common in Kent?

Flat roofs in Kent sit on low-rise post-war blocks of flats, lock-up garage blocks on estates and newer estates where the first extension roofs are now being replaced. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Kent the application goes to Maidstone Borough Council, Medway Council, Tunbridge Wells Borough Council and 10 other councils. More on the rules.

Can a liquid roof go over my existing roof, and what preparation is needed?

Yes, if the existing roof is dry, firmly bonded and sitting on a sound deck. A liquid membrane is only as good as what lies beneath it, so we test the old roof before agreeing to overlay it.

At survey we check for:

• Trapped moisture: soft spots, blisters or wet insulation mean the roof should be stripped, because water sealed in will cause new blisters and decay.
• Deck condition: any sponginess or deflection needs repair first.
• Adhesion: on felt and asphalt, loose areas are cut out and patched, and the existing surface must take the primer properly.
• Falls and ponding: a coating follows the roof as it is. If water ponds now, it will pond on the new surface too unless the falls are corrected.

Preparation then follows: loose chippings removed, the surface cleaned and left to dry, blisters cut back and repaired, cracks filled, and the right primer applied. On older felt, mineral surfaces may need extra cleaning to give a good bond. Where the tests fail, we say so plainly and quote for a strip and re-roof. Read more on ponding water.

How long does a liquid-applied roof last, and how is it guaranteed?

Cold liquid-applied roofs typically last 10 to 25 years or more, depending on the product and the thickness applied. One reinforced system has a BBA assessment of over 25 years, while lighter coatings designed to extend an existing roof sit at the lower end of the range.

Because life varies so much by product, it pays to know exactly what is being applied. Your quote should name the system, the reinforcement and the build-up.

Manufacturer guarantees are often tied to a named system, with lengths such as 10, 15 or 20 years depending on the specification, and some require registration or an approved applicator. We handle that registration where the system permits it. Every re-roof also carries our written workmanship guarantee, with the length set out in the quote, and you can ask about insurance-backed options. A BBA certificate is a product assessment, not a guarantee; our guarantees guide explains the difference.

Which towns in Kent do we cover?

• Maidstone
• Gillingham
• Royal Tunbridge Wells
• Folkestone
• Margate
• Ashford
• Canterbury
• Sittingbourne
• Gravesend
• Dartford
• Ramsgate
• Dover
• Tonbridge
• Strood
• Whitstable
• Deal
• Sevenoaks
• Herne Bay
• Broadstairs
• Faversham
• Swanley
• Longfield
• Swanscombe

Everything about liquid-applied roofing → · All flat roofing in Kent →